00198320-02_UM_ShuttleExtension-DE-EN-ZH.pdf - 第111页
Assembly and Instruction Manual 1 Introduction Shuttle Extension Edition 11/2018 1.2 Overview 13 1.2.8 Failure to use as prescribed Failure to use the prod uct as pre scribed can result in both dan ger to life and limb a…
1 Introduction Assembly and Instruction Manual SIPLACE TX
1.2 Overview Shuttle Extension Edition 11/2018
12
1.2.6 EC Declaration of conformity
The product/device described below
Manufactured by
ASM Assembly Systems Singapore Pte Ltd
535 Yishun Industrial Park A
ASM Tech-Park Building 2
Singapore 768775 1
1
conforms to the regulations and standards listed in the EU Declaration of Conformity provided.
1.2.7 Use as prescribed
The product may only be used in the application areas specified in the catalogs and technical doc
-
umentation, and only together with the third party equipment and components approved by ASM
Assembly Systems GmbH & Co. KG. Use for a different or extended purpose is not prescribed.
In the event of non-prescribed use, ASM Assembly Systems GmbH & Co. KG shall not accept any
liability for damage which occurs as a consequence and shall not guarantee the correct and
proper functioning of the machine components.
Use as prescribed also includes compliance with all the instructions in the Instruction Manual.
For the product to operate correctly and reliably, it must have been transported, stored, erected
and assembled correctly and must be operated and maintained with care.
Product Shuttle-conveyor
Type Shuttle extension Shuttle extension +
barcode option
Item no.
588508-xx 588509-xx
Assembly and Instruction Manual 1 Introduction
Shuttle Extension Edition 11/2018 1.2 Overview
13
1.2.8 Failure to use as prescribed
Failure to use the product as prescribed can result in both danger to life and limb and material
damage. For this reason, use other than that prescribed is expressly prohibited. In the event of
non-prescribed use, ASM Assembly Systems GmbH & Co. KG shall not accept any liability for
damage which occurs as a consequence and shall not guarantee the correct and proper function
-
ing of the machine components.
Use of the machine other than as prescribed includes, for example
– Operation of the shuttle extension with safety equipment deactivated or removed.
– Use of unauthorized accessories and additional modules.
– Use of the shuttle extension by unqualified personnel.
– Operation of the placement machine without a hand guard on the board conveyor.
– Persons standing on the top lid and cover plates.
– The use of wet cleansing tissues
1.2.9 Important information about environmentally-friendly disposal
SIPLACE machines are mainly made of materials and parts which can be easily separated and
disposed of in an environmentally-friendly manner.
1
1.2.10 Electromagnetic compatibility (EMC)
SIPLACE machines are developed and tested for professional use in industrial environments.
Electromagnetic compatibility in terms of the emission of interference cannot be guaranteed in any
other environment.
PLEASE NOTE
Correct and environmentally-friendly disposal by the operator
The owner of the system has sole responsibility for the proper environmentally-friendly
disposal of machines, working materials, consumables and wear parts.
Please observe your national statutory provisions for waste disposal and environ
-
mental protection.
1 Introduction Assembly and Instruction Manual SIPLACE TX
1.2 Overview Shuttle Extension Edition 11/2018
14
1.2.11 Note on original SIPLACE accessories
1
PLEASE NOTE
Use of original spare parts and authorized accessories
The use of other parts will affect safety and will invalidate the liability for any consequen
-
tial damage.
Only use original spare parts and authorized accessories from ASM Assembly Sys
-
tems GmbH&Co.KG.