00198320-02_UM_ShuttleExtension-DE-EN-ZH.pdf - 第158页
5 Calibration Assembly and Instruction Manual 5.1 Machine configuration Shuttle Extension Edition 11/2018 60 Fig. 5.1 - 2 Station software - machine configuration Click Machine configuration icon ( 2). –E x a m p l e :…
Assembly and Instruction Manual 5 Calibration
Shuttle Extension Edition 11/2018 5.1 Machine configuration
59
5 Calibration
5
5.1 Machine configuration
After successful installation, the shuttle is shown in the machine configuration of the station soft
-
ware.
Click Service (1) icon from the station GUI tool bar.
Fig. 5.1 - 1 Station Software - "Service" view
Click Machine configuration icon (2).
The Machine configuration view is shown: 5
PLEASE NOTE
Calibration procedure for the SIPLACE SX1/SX2
The calibration procedure shows the screenshots for a SIPLACE TX. However, the de
-
scription applies equally to the SIPLACE SX1/SX2.
(1)
(2)
5 Calibration Assembly and Instruction Manual
5.1 Machine configuration Shuttle Extension Edition 11/2018
60
Fig. 5.1 - 2 Station software - machine configuration
Click Machine configuration icon (2).
–Example: Input Shuttle and Output Shuttle are installed.
(1)
Assembly and Instruction Manual 5 Calibration
Shuttle Extension Edition 11/2018 5.1 Machine configuration
61
5.1.1 Update of embedded software
If necessary, you have to update the embedded software of the shuttle extension.
Click Service (1) icon from the station GUI tool bar.
Click Update subsystem icon (2).
Fig. 5.1 - 3 Station software - update the embedded software of the shuttle extension
Select the Subsystem Type => Shuttle.
Click Start embedded software update and follows the installation steps.
(1)
(1)