00198320-02_UM_ShuttleExtension-DE-EN-ZH.pdf - 第112页
1 Introduction Assembly and Instruction Manual SIPLACE TX 1.2 Overview Shuttle Extension E dition 11/2018 14 1.2.11 Note on origin al SIPLACE accessories 1 PLEASE NOTE Use of original spare parts and a uthorized accessor…
Assembly and Instruction Manual 1 Introduction
Shuttle Extension Edition 11/2018 1.2 Overview
13
1.2.8 Failure to use as prescribed
Failure to use the product as prescribed can result in both danger to life and limb and material
damage. For this reason, use other than that prescribed is expressly prohibited. In the event of
non-prescribed use, ASM Assembly Systems GmbH & Co. KG shall not accept any liability for
damage which occurs as a consequence and shall not guarantee the correct and proper function
-
ing of the machine components.
Use of the machine other than as prescribed includes, for example
– Operation of the shuttle extension with safety equipment deactivated or removed.
– Use of unauthorized accessories and additional modules.
– Use of the shuttle extension by unqualified personnel.
– Operation of the placement machine without a hand guard on the board conveyor.
– Persons standing on the top lid and cover plates.
– The use of wet cleansing tissues
1.2.9 Important information about environmentally-friendly disposal
SIPLACE machines are mainly made of materials and parts which can be easily separated and
disposed of in an environmentally-friendly manner.
1
1.2.10 Electromagnetic compatibility (EMC)
SIPLACE machines are developed and tested for professional use in industrial environments.
Electromagnetic compatibility in terms of the emission of interference cannot be guaranteed in any
other environment.
PLEASE NOTE
Correct and environmentally-friendly disposal by the operator
The owner of the system has sole responsibility for the proper environmentally-friendly
disposal of machines, working materials, consumables and wear parts.
Please observe your national statutory provisions for waste disposal and environ
-
mental protection.
1 Introduction Assembly and Instruction Manual SIPLACE TX
1.2 Overview Shuttle Extension Edition 11/2018
14
1.2.11 Note on original SIPLACE accessories
1
PLEASE NOTE
Use of original spare parts and authorized accessories
The use of other parts will affect safety and will invalidate the liability for any consequen
-
tial damage.
Only use original spare parts and authorized accessories from ASM Assembly Sys
-
tems GmbH&Co.KG.
Assembly and Instruction Manual 1 Introduction
Shuttle Extension Edition 11/2018 1.3 Technical data
15
1.3 Technical data
1
Dimensions shuttle extension (see in fig. 1.4 - 1, page 16)
Length 1 440 mm
Width 1 691.6 mm
Height at a conveyor height of 950 mm 1 1162.5 mm
Weight 1 80 kg
Dimensions shuttle extension with barcode reader extension (see in fig. 7.1 - 2
, page 74)
Length 1 647 mm
Width 1 691.6 mm
Height at a conveyor height of 950 mm 1 1162.5 mm
Weight 1 105 kg
Overall
Nominal voltage 42 V and 24 V
Full-load current 0.8 A and 1.5 A
Max. noise emissions 75 dB (A)
Ampere rating of largest motor 2 A
Short circuit rating of machine (SCCR) 0.5 kA
Power 0.033 kW and 0.036 kW
PCB thickness 0.3 mm to 4.5 mm
PCB width
Single conveyor 1 45 mm to 460 mm
Dual conveyor 1 45 mm to 260 mm
PCB length 45 mm to 375 mm
PCB weight Max. 2 kg
PCB detection LED light barriers
TX conveyor rail positions/PCB width
Transport rail position 231 => Distance between
fixed rail (outer position) 462 mm
=> PCB width
210 mm
Transport rail position 268
=> Distance between
fixed rail (outer position) 536 mm
=> PCB width
250 mm
Transport rail position 281
=> Distance between
fixed rail (outer position) 562 mm
=> PCB width
260 mm