00198320-02_UM_ShuttleExtension-DE-EN-ZH.pdf - 第121页
Assembly and Instruction Manual 2 Oper ational safety Shuttle Extension Edition 11/2018 2.1 Safety instructions 23 2.1.3.2 Safety of operators and other persons Machine operators must only carry out work for which they…
2 Operational safety Assembly and Instruction Manual
2.1 Safety instructions Shuttle Extension Edition 11/2018
22
2.1.2 Qualified personnel
Qualified and appropriately trained personnel are employees who are familiar with the assembly,
configuration, operation and preventative maintenance of the placement machines, plus addi
-
tional equipment and who are adequately qualified, for example as follows:
– have been trained, instructed or authorized to switch on and off, isolate, earth and identify
electrical circuits and system components in accordance with normal safety standards.
– have been trained or instructed in the upkeep and use of appropriate safety equipment in ac
-
cordance with normal safety standards.
2.1.3 Important notes on operational safety
The following points MUST be observed in order to maintain operational safety:
2.1.3.1 General
The operational safety of shuttle extension can be guaranteed only if the system is used as
prescribed and in accordance with the instructions in the Instruction Manuals.
Always follow any safety regulations specific to your country.
Make sure that the warning labels are always clearly identifiable and always easily readable.
Replace any damaged warning or notice labels. Replace any labels that are missing.
If tasks need to be performed on the SIPLACE machines and if you do not have adequately
trained personnel at your company, always request the services of a service technician from
ASM Assembly Systems GmbH&Co.KG! ASM Assembly Systems GmbH&Co.KG will not
accept liability for any damage or consequential damage that is the result of unauthorized/
incorrect work.
If particularly dangerous situations are found during operation of the SIPLACE machine, the
machine operator must notify the manufacturer of this without delay and in writing, so that
suitable measures can be taken to minimize the potential hazard.
Assembly and Instruction Manual 2 Operational safety
Shuttle Extension Edition 11/2018 2.1 Safety instructions
23
2.1.3.2 Safety of operators and other persons
Machine operators must only carry out work for which they have been adequately trained and
with which they are totally familiar.
NEVER open one top lid if you are not totally familiar with the use and functioning of the ma
-
chine! Do not open the top lid during operation unless you are told to do so in this manual or
in the station software dialog.
For your own safety, wear work clothes that conform to the guidelines of the professional as
-
sociation or to the regulations of your country, i.e. safety shoes, hair net or no wide sleeves
etc.
Reduce the risks by not wearing scarves, chains or ties at your work post.
People with long hair must wear a protective head covering.
The shuttle extension may not come into contact with splashed or sprayed water or other liq
-
uids. Cleaning with wet cloths is also prohibited. Cleaning may only be performed with dry
cloths.
2.1.3.3 Safety of systems and equipment
Never make changes, however minor, unless you are totally aware of the effect they will have
on the overall functioning of the system.
Do not make modifications to the safety equipment. In particular, NEVER deactivate circuit-
breakers or remove safety devices.
2 Operational safety Assembly and Instruction Manual
2.2 Warning labels Shuttle Extension Edition 11/2018
24
2.2 Warning labels
Fig. 2.2 - 1 Warning labels on the shuttle extension
External grounding point, item no. 00359574-xx
Item W 203, item no. 03009342-xx (on both sides)
Item W 204, item no. 03009343-xx (on both sides)
Item W 210, item no. 03009350-xx
(T) Direction of PCB conveyor (from SIPLACE TX, SX1/SX2 V2)
W 203
W 210
W 204
External grounding
point