00198320-02_UM_ShuttleExtension-DE-EN-ZH.pdf - 第144页
3 Assembly on the SIPLACE TX Assembly and Instruction Manual 3.3 Assembly kit and mechanical connection Shuttle Extension Edit ion 11/2018 46 Finalize 3 Leave a gap of 2 mm to 8 mm between the fram e of the SIPLACE TX …
Assembly and Instruction Manual 3 Assembly on the SIPLACE TX
Shuttle Extension Edition 11/2018 3.3 Assembly kit and mechanical connection
45
Interface brackets on output shuttle extension side 3
Fig. 3.3 - 10 Interface brackets on output conveyor - left side
Fig. 3.3 - 11 Interface brackets on output conveyor - right side
(1) Interface bracket output conveyor - left side
(2) Interface bracket output conveyor - right side
(1)
(2)
3 Assembly on the SIPLACE TX Assembly and Instruction Manual
3.3 Assembly kit and mechanical connection Shuttle Extension Edition 11/2018
46
Finalize 3
Leave a gap of 2 mm to 8 mm between the frame of the SIPLACE TX and the frame of the
shuttle extension. See fig. 3.2 - 1
, page 38.
Check the transition between the shuttle extension and the SIPLACE TX again.
If necessary, correct the height at the feet or the fixture of the interface brackets.
Once the shuttle extension has been correctly aligned, tighten the top nuts (item 1 in fig. 3.3
- 4, page 41) to clamp all shuttle extension feet.
Assembly and Instruction Manual 3 Assembly on the SIPLACE TX
Shuttle Extension Edition 11/2018 3.4 Electrical connections
47
3.4 Electrical connections
3
3.4.1 Electrical connection on the shuttle extension
Connect the following cables to the shuttle extension connection.
– 4 x SMEMA cable [Item. No.: 03152800-xx]
– 1 x CAN bus cable [Item. No.: 03133551-xx]
– 1 x Power interface cable to SIPLACE TX [Item. No. 03133550-xx]
Fig. 3.4 - 1 Electrical connection on the shuttle extension
(1) SMEMA connection XL1 UPSTREAM - lane 1 to machine before
(2) SMEMA connection XL2 UPSTREAM - lane 2 to machine before
(3) CAN-BUS connection
(4) SMEMA connection XL2 DOWNSTREAM - lane 2 to next machine
(5) SMEMA connection XL1 DOWNSTREAM - lane 1 to next machine
(6) POWER interface X50 to SIPLACE TX
PLEASE NOTE
Use of the circuit diagrams of the shuttle extension
For detail information, please refer to the circuit diagrams of the shuttle extension.
(6)
(1)
(2)
(3)
(4)
(5)