SL940-Install-Ops-Maintenance-7210918_B.pdf - 第167页

A ppendix A - Material Safet y Information A -3 MSDS - MULTEMP PS NO 2 - A 0 7 - 350 (Conti nued) SECTI ON VII - Precautions for Safe Handling and Use Steps if Material Release d/Spi lled TRANSFER BULK OF M IXTURE INT O …

100%1 / 208
A-2 Appendix A - Material Safety Information
MSDS - MULTEMP PS NO 2-A 07-350 (Continued)
SECTION III - Physical/Chemical Characteristics
Appearance/Odor WHITE PASTE; SLIGHT ODOR
Boiling Point NA
Melting Point 190 C
Vapor Pressure NA
Specific Gravity 0.92
Solubility in Water NEGLIGIBLE
Container Type R
Container Pressure Code 1
Temperature Code 4
Product State Code S
SECTION IV - Fire and Explosion Hazard Data
Flash Point 215
Flash Point Method SCC
Lower Explosion Limit NA
Upper Explosion Limit NA
Extinguishing Media
DRY CHEMICAL, WATER FOG, CO2, FOAM,
SAND/EARTH
Special Fire Fighting Procedures
DENSE SMOKE. FIRE FIGHTER WEAR
APPROVED SCBA. DO NOT USE WATER
EXCEPT FOG
SECTION V - Reactivity Data
Stability YES
Stability Conditions to Avoid AVOID OVER-HEATING
Materials to Avoid
STRONG OXIDIZERS SUCH AS HYDROGEN
PEROXIDE, BROMINE, & CHROMIC ACID
Hazardous Decomposition Products
CARBON MONOXIDE & DIOXIDE, OXIDE OF
NITROGEN
Hazardous Polymerization NO
Polymerization Conditions to Avoid WILL NOT OCCUR
SECTION VI - Health Hazard Data
Route of Entry: Skin U
Route of Entry: Ingestion U
Route of Entry: Inhalation U
Health Hazards - Acute and Chronic {EYES}
Emergency/First Aid Procedures
{EYES} IMMEDIATELY FLUSH W/ WATER
FOR AT LEAST 15 MIN. {SKIN} REMOVE
EXCESS W/ CLOTH OR PAPER & WASH
THOROGHLY W/ SOAP & WATER. {INGEST}
CONSULT PHYSICIAN. DO NOT INDUCE
VOMITING {INHALE} KEEP VICTIM WARM &
QUIET. REMOVE TO FRESH AIR
Appendix A - Material Safety Information A-3
MSDS - MULTEMP PS NO 2-A 07-350 (Continued)
SECTION VII - Precautions for Safe Handling and Use
Steps if Material Released/Spilled
TRANSFER BULK OF MIXTURE INTO ANOTHER
CONTAINER. ABSORB RESIDUE W/ AN INERT
MATERIAL SUCH AS EARTH, SAND, &
VERMICULITE. SWEEP UP & DISPOSE SOLID
WASTE IN ACCORDANCE W/ LOCAL, STATE &
FED REGS
Waste Disposal Method
DISPOSE OF IN ACCORDANCE W/ STATE,
LOCAL & FED REGS. INCINIRATE IN ACCORD.
W/ APPLICABLE REGS. MATERIAL MAY BE
RECOVERED & RECYCLED
Handling and Storage Precautions
KEEP CONTAINER CLOSED UNTIL READY FOR
USE. STORAGE AWAY FROM FIRE SOURCE OR
SUNLIGHT & IN COOL DRY AREA
Other Precautions
DO NOT USE PRESSUE TO EMPTY
CONTAINER. WHEN EMPTY, CONTAINER MAY
HAVE VAPOR OR PRODUCT RESIDUE. DO NOT
CUT, PUNCTURE OR WELD ON OR NEAR THE
DRUM
SECTION VIII - Control Measures
Respiratory Protection
GOOD VENTILATION SHOULD BE SUFFICIENT
Ventilation
GOOD GENERAL VENT. SHOULD BE
SUFFICIENT
Protective Gloves
RUBBER OR PLASTIC OIL RESISTANT
Eye Protection
CHEMICAL SAFETY GOGGLES & IF HANDLED
HOT, FULL FACE SHIELD
Other Protective Equipment
NONE
SECTION IX - Label Data
Protect Eye
NO
Protect Skin
NO
Protect Respiratory
NO
Chronic Indicator
UNKNOWN
Contact Code
UNKNOWN
Fire Code
UNKNOWN
Health Code
UNKNOWN
React Code
UNKNOWN
SECTION X - Transportation Data
SECTION XI - Site Specific/Reporting Information
Volatile Organic Compounds (P/G)
0
Volatile Organic Compounds (G/L)
0
SECTION XII - Ingredients/Identity Information
Ingredient #
01
Ingredient Name
*REFINED MINERAL OIL
CAS Number
101316727
Percent
25
A-4 Appendix A - Material Safety Information
A.3 MSDS Moly-Graph® Extreme Pressure Multi-Purpose Grease
Section 1: Product & Company Identification
Product Name: Moly-Graph® Extreme Pressure Multi-Purpose Lithium Grease
Product Number(s): SL3141, SL3144, SL3145, SL3146, SL3330, 8SL3141
Manufactured By:
CRC Industries, Inc.
885 Louis Drive
Warminster, PA 18974
General Information
Technical Assistance
Customer Service
24-Hr Emergency (CHEMTREC)
(215) 674-4300
(800) 521-3168
(800) 272-8963
(800) 424-9300
Section 2: Hazards Identification
Emergency Overview
Appearance & Odor: Grey semi-solid to solid grease with a faint petroleum odor
As defined by OSHA’s Hazard Communication Standard, this product is nonhazardous.
Potential Health Effects:
EYE: May cause irritation.
SKIN: Repeated or prolonged contact can result in drying of the skin.
INHALATION: Heating can generate vapors that may cause respiratory irritation, nausea
and headaches. Inhalation hazard at room temperature is unlikely due to
the low volatility of this product.
INGESTION: Can cause stomach ache and vomiting. Main hazard, if ingested, is
aspiration into the lungs and subsequent pneumonitis.
CHRONIC EFFECTS Unknown
TARGET ORGANS: None known
Medical Conditions Aggravated by Exposure
Skin or respiratory conditions
See Section 11 for toxicology and carcinogenicity information on product ingredients.