SL940-Install-Ops-Maintenance-7210918_B.pdf - 第79页
Pow er - up an d Test in g 4- 19 4.15 Coating System Opti ons Perfo rm the foll owing ECXP comm ands to m ak e sure that the v arious coating syst em options are functioning proper ly. 4.15.1 Laser Fan Width Control If t…
4-18 Power-up and Testing
9. Make sure that the stop pins function correctly during the loading process.
If they do not function correctly, refer to Section 8 - Troubleshooting.
10. Click on
Utilities > Conveyor Utilities > Unload Board.
11. Make sure that the stop pins function correctly during the unloading process.
If they do not function correctly, refer to Section 8 - Troubleshooting.
4.14.1 ECXP Conveyor Utilities
In addition to the IO Tool described earlier in this section, the following ECXP commands, shown in
Table 4-4, may also be used to test and set up the Conveyor. To access the Utilities menu, click on
Edit > Edit Mode from the ECXP Operator Screen. To access the Conveyor Utilities commands, click on
Utilities > Conveyor Utilities from the ECXP Edit screen menu bar (Figure 4-13).
Table 4-4 ECXP Conveyor Utilities Commands
ECXP Command Description
Terminal
Displays a terminal window that is used to send ACL commands to the
Conveyor Controller.
Load Board
Requests a board from the upstream machine and loads it into the
workcell.
Unload Board Moves the current board on the Conveyor out of the workcell.
Restore Defaults
Resets the Conveyor configuration parameters to the factory defaults.
USE THIS FEATURE ONLY IF THE CONTROLLER MEMORY IS
CORRUPT.
Download File
Sends the designated file to the Conveyor Controller. The file is
immediately executed.
4.14.2 Inverter
If the Conveyor is equipped with an inverter, use the following ECXP command to test the inverter. To
access the Utilities menu, click on
Edit > Edit Mode from the ECXP Operator Screen. The command
described below is accessed from the ECXP Edit screen menu bar
1. Click on
Utilities > Inverter to move the currently loaded board into the Inverter.
2. Verify that the inverter flips or rotates the board.
Power-up and Testing 4-19
4.15 Coating System Options
Perform the following ECXP commands to make sure that the various coating system options are
functioning properly.
4.15.1 Laser Fan Width Control
If the system is equipped with Laser Fan Width Control, you may use ECXP to test and adjust pressure as
shown below. For additional information, refer to the Laser Fan Width Control Owners Manual.
1. Select
Edit > Edit Mode from the ECXP Operator Screen to access the ECXP Edit Screen.
2. Select
Utilities > Pressure Adjust from the menu bar.
A cascading menu listing the tools configured for your system opens (Figure 4-14).
NOTE Menu choices will vary depending upon system configuration.
Figure 4-14 ECXP Edit Screen - Pressure Adjust Menu
3. Select the desired tool.
The Pressure Output dialog box opens. This dialog box is used to test and adjust
pressures (Figure 4-15).
4-20 Power-up and Testing
Figure 4-15 Pressure Output Dialog Box
4. Enter a value in the Output field and press the [Tab] key on your keyboard.
As an alternative, you may use the slider bar in the dialog box to adjust the pressure. It
may take several seconds for the pressure to change and a value to appear.
5. Click on the
On button to turn the output on. Click on the Off button to turn it off.
6. Click and hold on the
Pulse button to turn the output on. The output turns off when you
release the button.
4.15.2 Flow Meter
If the system is equipped with a Flow Meter, use the following ECXP command to test functionality.
1. Select
Edit > Edit Mode from the ECXP Operator Screen to access the ECXP Edit Screen.
2. Select
Utilities > Fluid System > Flow Meter Test from the menu bar to test the Flow Meter.
NOTE This option will not appear on the menu unless your system has been configured for a
Flow Meter. For detailed information, refer to the Easy Coat User Guide or the Flow
Monitoring System Owner’s Manual.
4.15.3 Bar Code Scanner
If the system is equipped with a Bar Code Scanner, use the following ECXP command to test
functionality.
1. Select
Edit > Edit Mode from the ECXP Operator Screen to access the ECXP Edit Screen.
2. Select
Utilities > Bar Code Scanner > Trigger Read from the menu bar to scan the bar code
that is currently under the scanner and display the code in a dialog box.
This utility is useful if the bar code label does not include the alphanumeric
representation of the bar code.
3. Click on
Utilities > Bar Code Scanner > Terminal to open a terminal window that enables
you to communicate directly with the scanner.
NOTE This option will not appear on the menu unless your system has been configured for a Bar
Code Scanner. For detailed information, refer to the Easy Coat User Guide.