编带机说明书-含图纸ttm402.pdf - 第109页

D292105.16c.fm Configure Inspection Chapter 5: Setup 5- 11 2. Click T rigger ON , then center a p art under the camera. 3. Select or create a program from the Program drop-down menu. A yellow Selection Box will appear ov…

5-10 TM-403 User’s Guide

Configure Inspection D292105.16c.fm

Configure Inspection

Note: Significant portions of this documentation were provided by: Keyence Cor-

poration of America. In order to use the Keyence IV Vision System, the camera

must be configured and set to Run Mode in the Keyence HMI as well as being

enabled on the TM-402 HMI. Please complete the following instructions to cor-

rectly configure the vision system.

Configure Computer

1. Once the connection is complete, the Run/Program window will open. Select

Program.

D292105.16c.fm Configure Inspection

Chapter 5: Setup 5- 11

2. Click Trigger ON, then center a part under the camera.

3. Select or create a program from the Program drop-down menu. A yellow Selection

Box will appear over the part image.

4. Click NAVI Sensor Setup.

Step 2:

Vision

Setup

CONFIGURE

COMPUTER

5-12 TM-403 User’s Guide