编带机说明书-含图纸ttm402.pdf - 第44页

3-2 TM-403 User’s Guide Introduction D292105.6a.fm Intr oduction This chapter gives an ove rview of the TM-402 Human Machine Interface (HMI) , defining the but- tons, screens and setting options that allow the operator t…

Chapter 3: Human Machine Interface

Contents

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-2

Touch Screen. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2

HMI Tabs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2

Job Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-3

Job Wizard. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-6

Taper Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-16

Camera Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-17

Sealer Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-18

Head Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-20

Bowl Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-24

Run Tab. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-26

3-2 TM-403 User’s Guide

Introduction D292105.6a.fm

Introduction

This chapter gives an overview of the TM-402 Human Machine Interface (HMI), defining the but-

tons, screens and setting options that allow the operator to customize the TM-402’s performance

to their taping needs.

Note: Proceed to Chapter 4: Setup for instructions on how to configure the HMI and to

Chapter 5: Operation for instructions on how to run a job

Touch Screen

The user interacts with the TM-402 through a touch screen HMI which is located on the front of

the machine below the taper. Touching the HMI screen has the same effect as a left click with the

mouse. Although only lightly touching the buttons or data fields is necessary for activation, the

action is referred to as “pressing” in this manual.

Note: Use care when operating the touch screen and do not use any objects other than a

finger to touch the screen. A stylus can also be used to click the various buttons.

HMI Tabs

When the TM-402 is powered on, the user interface opens to the Job Tab. The Job Tab is pic-

tured above as it appears when the motors have been homed.

The Tab Menu is located on the left side of all screens. There are five tabs on the TM-402 HMI:

Job, Taper, Head, Bowl and Run. These tabs allow the user to configure pick head, taper, bowl

feeder and job settings and to run jobs.

To navigate between tabs, press the desired tab name on the Tab Menu and the selected tab will

open. The active tab button is shaded blue. In the example on the above, the Job Tab is

selected.

D292105.6a.fm Introduction

Chapter 3: Human Machine Interface 3-3

Each tab contains a variety of toggle buttons and open fields. Press any field to open a numeric

or alpha-numeric keypad and enter the appropriate information.