编带机说明书-含图纸ttm402.pdf - 第41页
D292105.5b.fm Bowl Feeder Chapter 2: TM-403 Overview 2-11 Bo wl F eeder A. Bowl B. Linear T rack C. Nest D. Part Present Sensors E. Amplifiers F. Bowl Connections Note: The Bowl Feeder Assembly’s appearance may vary , de…
2-10 TM-403 User’s Guide
Pick & Place Assembly D292105.5b.fm
Pick & Place Assembly
Pick & Place Head
A. Nozzle D. Pick Actuator Adjustment Screw
B. Nozzle Vacuum Sensor E. Place Actuator Adjustment Screw
C. Nozzle Vacuum Filter
Pick & Place Controls
A. Blow-off Air Pressure Gauge & Control B. Nozzle Vacuum Sensor
A
B
D
E
C
AB
D292105.5b.fm Bowl Feeder
Chapter 2: TM-403 Overview 2-11
Bowl Feeder
A. Bowl
B. Linear Track
C. Nest
D. Part Present Sensors
E. Amplifiers
F. Bowl Connections
Note: The Bowl Feeder Assembly’s appearance may vary, depending on the part size
which will be processed and the bowl size which was ordered.
B
C
D
A
E
F
2-12 TM-403 User’s Guide
2D Vision System D292105.5b.fm
2D Vision System
The Keyence IV Vision system consists of the following components shown below.
A. Adjustable Mounting Bracket F. Status LED
B. Position Adjustment Knobs G. Ethernet Traffic Indicator
C. Power & I/O Connector H. Keyence IV-G Camera
D. Ethernet Connector I. Lens Cover/Focus Ring
E. M12 Ethernet Cable (not shown)
Note: For advanced Vision configuration, a computer is required. This can be provided by
the user or purchased as an option from V-TEK, Inc. System requirements for the vision
computer follow:
• Operating system: Microsoft® Windows 7
TM
(32 or 64 bit)
• 128 MB RAM
• 1024 x 768 (96 DPI) or 1280 x 1024 (120 DPI display
• Ethernet port
A
B
C