编带机说明书-含图纸ttm402.pdf - 第112页
5-14 TM-403 User’s Guide Configure Inspection D292105.16c.fm 7. Select the Focus Adjustment butto n on the right. Click the Automatic Focus Adjustment button. One or more yellow dot s may appear above the Undo button, re…
D292105.16c.fm Configure Inspection
Chapter 5: Setup 5- 13
Adjust Trigger Options to External Trigger with a 0ms Trigger Delay.
6. Select the Brightness Adjustment button on the right
Set the Imaging Mode to High Gain, then click the Automatic Brightness
Adjustment button. Adjust the Exposure Time as needed to achieve the best
contrast between the laser mark and the part.
Step 2:
Vision
Setup
CONFIGURE
COMPUTER
5-14 TM-403 User’s Guide
Configure Inspection D292105.16c.fm
7. Select the Focus Adjustment button on the right.
Click the Automatic Focus Adjustment button. One or more yellow dots may
appear above the Undo button, representing the best focus point(s). Click on the
yellow dot(s) to jump to the associated focus point and select the best one. Adjust
Focus Position as needed using the plus/minus buttons.
Step 2:
Vision
Setup
CONFIGURE
COMPUTER
D292105.16c.fm Configure Inspection
Chapter 5: Setup 5- 15
8. Select the Extended Functions button on the right.
Click on the Imaging Area tab (not shown) and adjust the selection box so it
captures the minimum area needed to achieve the desired inspection.
Step 2:
Vision
Setup
CONFIGURE
COMPUTER