编带机说明书-含图纸ttm402.pdf - 第120页
5-22 TM-403 User’s Guide Configure Inspection D292105.16c.fm The Eraser Settings wind ow will open. The Eraser appears as a white square on the image. Adjust eraser size as needed, then click and drag it over any unwante…
D292105.16c.fm Configure Inspection
Chapter 5: Setup 5- 21
Adjust the yellow Selection Box so it surrounds the selected mark.
In the Fine Tune Outline section, click the Remove Outline button.
Step 2:
Vision
Setup
CONFIGURE
COMPUTER
5-22 TM-403 User’s Guide
Configure Inspection D292105.16c.fm
The Eraser Settings window will open.
The Eraser appears as a white square on the image. Adjust eraser size as needed,
then click and drag it over any unwanted data that is outlined in green on the
image.
Reduce Eraser size to remove any smaller green spots of unnecessary data. Click
OK to finalize edit.
Step 2:
Vision
Setup
CONFIGURE
COMPUTER
D292105.16c.fm Configure Inspection
Chapter 5: Setup 5- 23
Click Live Adjustment and the sensor will continuously take measurements.
Adjust the threshold to yield the highest difference between good and bad parts,
then click OK.
Step 2:
Vision
Setup
CONFIGURE
COMPUTER