编带机说明书-含图纸ttm402.pdf - 第67页

D292105.6a.fm Bowl Tab Chapter 3: Human Machine Interface 3-25 Bo wl T ab The Bowl Setup T abs allows the user to configure vacuum and vibratory settings for the Bowl Feeder and Linear T rack. 1. Bowl Screen 1 allows the…

3-24 TM-403 User’s Guide

Head Tab D292105.6a.fm

• If rotation is set at -90, the part will be rotated 90 degrees clockwise prior to

placement.

• If rotation is set at +90, the part will be rotated 90 degrees counter-clockwise

prior to placement.

Nozzle Blow Off Time is the amount of time in milliseconds that the nozzle will

activate the blow-off pressure to place a part in the Taper.

C. Press the left Arrow button to return to the second Head Setup screen or press a

button on the Tab Menu to move to a new tab.

Note: The TM-402 will use these settings for the current job. To save Head Settings for

future jobs, go to the Job Tab, select a job name and Save.

D292105.6a.fm Bowl Tab

Chapter 3: Human Machine Interface 3-25

Bowl Tab

The Bowl Setup Tabs allows the user to configure vacuum and vibratory settings for the Bowl

Feeder and Linear Track.

1. Bowl Screen 1 allows the user to configure Linear Track and Nest settings as desired..

A. Press any tab in the Tab Menu to open that tab window.

B. The Linear Vibratory button turns the Linear Track Vibratory to Enabled or Dis-

abled to fill the Linear Track.

C. The Arrow button advances the user to the next Bowl Tab screen.

Bowl Screen 1

3-26 TM-403 User’s Guide

Bowl Tab D292105.6a.fm

2. Bowl Screen 2 allows the user to set timers and delays..

A. Press any tab in the Tab Menu to open that tab window.

B. Bowl On Delay is used to set the length of time in seconds between when the

Track Full Sensor detects that there are no parts in the track and when the bowl is

turned on to feed parts. The minimum recommended setting for Bowl On Delay is

one second.

Bowl Off Delay is used to set the length of time in seconds between when the

Track Full Sensor first detects a part in the nest and when the bowl is automati-

cally turned off.

The Linear Track’s Nest has a sensor which detects when parts are present. The

Empty Nest Timer setting is the time in milliseconds the Empty Nest Timer

should wait before it beeps to indicate parts are not loading in the nest.

Track Off Delay is the time in seconds that the vibratory will continue to vibrate

the track after the machine is stopped.

Note: The TM-402 will use these settings for the current job. To save Bowl Feeder Set-

tings for future jobs, go to the Job Tab, select a job name and Save.

Bowl Screen 2