编带机说明书-含图纸ttm402.pdf - 第202页

Appendix A: Sensors A-6 SMC ZSE30 Vacuum Sensor D291842.11.fm

SMC ZSE30 Vacuum Sensor D291842.11.fm

A-5 Appendix A: Sensors

one is present, set the threshold closer to the pressure reading when no part is on the

nozzle. In this way, the optimum setting for each specific part can be reached.

Initial Factory Settings

If for some reason the sensor needs to be re-initialized to the default factory settings, follow the

steps below:

1. Press and hold the Set button for at least two seconds. The sensor will enter initialization

mode. The first setting to appear will be the Indication Unit setting. This should be set to

PA. Use the Up Arrows and Down Arrows to adjust this, if necessary.

2. Press the Set button to advance to the Display Color setting. This should be set to Sor

(Red/ON).

3. The next setting is the Operation mode setting. This should be set to HyS (hysteresis).

4. The next setting is the Output mode setting. This should be set to nC (normally closed). If

this setting is incorrect, the sensor will function backwards, such that the machine will not

detect a part when is on the nozzle and detect a part when no part is present.

5. The next setting is the Response Time setting. This should be set to 2.5.

6. The final setting is the Auto Preset setting. This should be set to mAn (manual).

7. Press the Set button to return to Normal Operation mode.

Appendix A: Sensors A-6

SMC ZSE30 Vacuum Sensor D291842.11.fm

D292105.12a.fm

TM-402 Suggested Spare Parts List

Part Number Description Qty

102534 Reset Switch Contact 1

102597 Digital Pressure Switch 1

105786 Take-up Motor 1

200401 Sealer Air Regulator 1

200636 Solenoid Air Valve 1

201026 Pick & Place Vacuum Air Filter 1

201207 Convum Vacuum Cup 1

201280 Nozzle Cup A3, 60 x 30 2

209250 Pick & Place Spring 1

201271 SPT Vacuum Cup 1

201297 Large Quad Vacuum Cup 1

201298 Medium Quad Vacuum Cup 1

201299 Small Quad Vacuum Cup 1

210019 Taper Timing belt 1

210109 Pick & Place Timing Belt 1

212001 Solenoid O-Rings 3

212008 Taper Idler O-Ring 2

212025 Nozzle O-Rings 2

244010 Taper Thermocouple 2

244012 Taper Heater 2

261122 Heat Shoe 1

266737 Taper Drive Sprocket 1

292464 Convum Nozzle Kit 1

292465 Quad Nozzle Kit 1

292467 SPT Nozzle Kit 1

290603 Taper Upper PSA Wheel Assembly 2

500440 Vision Sensor Amplifier 1