编带机说明书-含图纸ttm402.pdf - 第48页
3-6 TM-403 User’s Guide Job Tab D292105.6a.fm Pressing the Lef t Arrow button in the Homing Screen will open the Run T ab. Select the Job T ab from the T ab Menu to navigate back to the Job T ab . J ob T ab Over vie w Th…
D292105.6a.fm Job Tab
Chapter 3: Human Machine Interface 3-5
As the homing sequence is completed, the bar gradually turns from black to green. A Homing
Succeeded! message appears at the end of the sequence.
If a problem arises during homing of the motor, the status bar will turn red and a Homing Failed
message will appear.
3-6 TM-403 User’s Guide
Job Tab D292105.6a.fm
Pressing the Left Arrow button in the Homing Screen will open the Run Tab.
Select the Job Tab from the Tab Menu to navigate back to the Job Tab.
Job Tab Overview
The Job Tab allows the user to select a pre-programmed job, change job information and move
to the other tab screens. It also features an easy-to-use Job Wizard which leads the user through
the job set-up process. The Job Tab is pictured below.
A. Press any tab in the Tab Menu to open that tab window.
B. The Job Library holds up to fifty saved jobs (Job 1 through Job 50). The Up and
Down Arrows buttons to the right of the Job Library are used to move through the
job list one job at a time. The Page Up and Page Down Arrows buttons to the left
A
B
C
D
D292105.6a.fm Job Tab
Chapter 3: Human Machine Interface 3-7
of the Job Library are used to move through the job list five jobs at a time. The
Enter button selects and highlights a job from the Job Library list so it can be
opened or saved.
C. The Job Information section has two open fields for entering job information: Job
Quantity and Job Description. Press the field to open a keypad for data entry. The
maximum number of characters for any field is 20.
D. At the bottom of the Job Tab there are three control buttons:
• The Open button opens the currently selected job.
• The Save button is used to save current job settings for future use.
• The Job Wizard button opens the Job Wizard, allowing the user to configure job
settings.
Job Wizard
Pressing the Job Wizard button in the Job Tab opens the Job Wizard. The Job Wizard has 13
screens that lead the user through the job set-up process. Instructions at the top of each Job
Wizard screen explain each step. The Arrow buttons on the bottom of the window move the user
forward and backwards through the process. Pressing the right Arrow button opens the next Job
Wizard screen. Pressing the left Arrow opens the previous screen.
1. In the first Job Wizard screen the user resets the job to initialize the system. Press Reset
Job, then press the right Arrow key to move to the next Job Wizard screen.
Arrow Buttons
Job Wizard Step 1