00194440-10_SM_X-Series_Customer_en.pdf - 第10页

Contents 10 Service Manual SIPLACE X Series 6.4 Cutter 376 6.4.1 Control Unit on Cutter 376 6.4.2 Control Unit on Cutter (CAN Nodes ) 377 6.5 COT insert 378 6.5.1 Connecting assy FCU [03059783 -xx] 3 78 6.6 Nozzle Change…

100%1 / 384
Contents
Service Manual SIPLACE X Series 9
5.4.3.1 General Notes 326
5.4.3.2 Connecting the Dual Conveyor Lifting Tables 329
5.4.4 Checking the Limit Switch Position 330
5.4.4.1 Adjusting the Limit Switch for Initializing the Adjustment Unit 331
5.4.5 Setting the Laser Light Barrier for the Stopper Position 331
5.4.6 Board Clamping Functions 333
5.4.6.1 Setting Board Clamping 334
5.4.6.2 Setting the Board Clamping 335
5.4.7 Readjusting the Holder for the Stopper and Proximity Switch (QC) 338
5.4.8 Lifting Table Functions 339
5.4.8.1 Adjusting the Speed of the Lifting Table (SW601) 340
5.4.8.2 Adjusting the Speed of the Lifting Table (from SW602) 342
5.4.8.3 Adjusting the Speed of the Lifting Table (from SW701) 343
5.4.8.4 Setting the Lifting Table Unit [00358684-05] 344
5.4.8.5 Adjusting the Clamping of the Lifting Table 345
5.4.9 Checks After Mechanical Work on the Conveyor 346
5.5 Settings on the Component Trolley 347
5.5.1 Setting the Actuator on the Component Trolley 347
5.5.2 Component Trolley - Setting the Basic Height 347
5.5.2.1 Parts, equipment and tools 347
5.5.2.2 Adjusting the Component Trolley to the Board Transport Height 348
5.5.2.3 Adjusting the Component Trolley Height 349
5.6 Other Settings 350
5.6.1 Firmware Download Note 350
5.6.2 Checking the Firmware Function 350
5.6.3 Firmware Download (SW 70x) 351
5.6.4 Transferring the head specific data 352
5.6.4.1 Transmitting the Head-Specific Data (from SW601) 352
5.6.4.2 Transferring the Head-Specific Data (from SW701) 354
5.6.5 Calibration 355
5.6.5.1 Calibrating the Heads and Cameras 355
5.6.5.2 Calibration Procedure 356
5.6.6 DIP Switch for Camera Types 25 and 33 357
5.6.7 Installing the CAN Card Driver 358
5.6.7.1 Checking the Installed Driver Versions 358
5.6.7.2 Installing the New Driver 359
6 Description of the Circuit Boards 363
6.1 Electrics and Control 363
6.1.1 Inrush Current Limitation Board Transformer (A1) [03066830-xx] 363
6.2 Gantry 364
6.2.1 Head Adapter for TwinHead 364
6.2.2 Head Adapter for C&P20A 365
6.2.3 Head Interface C500 366
6.2.3.1 LEDs on the Head Interface 367
6.2.3.2 DIP Switches on the Head Interface 368
6.2.4 DIP Switch on the Vision Board 369
6.2.4.1 DIP Switch on the Vision Board (Digital Version 01) 369
6.2.4.2 DIP Switch on the Vision Board (Digital Version 02) 369
6.3 Conveyor 370
6.3.1 Conveyor Control TSP 301 370
6.3.1.1 Jumper Settings for TSP 301 370
6.3.1.2 Conveyor Control TSP 301 with Siemens Interface 371
6.3.1.3 LED Display on Conveyor Control TSP 301 372
6.3.1.4 Assignment Table: LEDs on the TSP 301 Conveyor Control 372
6.3.1.5 Siemens/SMEMA TSP 301 Interface Description 375
Contents
10 Service Manual SIPLACE X Series
6.4 Cutter 376
6.4.1 Control Unit on Cutter 376
6.4.2 Control Unit on Cutter (CAN Nodes) 377
6.5 COT insert 378
6.5.1 Connecting assy FCU [03059783-xx] 378
6.6 Nozzle Changers 379
6.6.1 NC main board CPx [03069324-xx] 379
6.6.2 Nozzle Changer Main Board C&P20P [03107652-xx] 380
6.7 Stationary cameras 381
6.7.1 Vision LED driver VLT 33 [03039244-xx] 381
6.7.2 Vision Control Board for IC Camera or FC Camera 382
Introduction
1.1.1 Conventions for the use of safety instructions Safety Instructions
Service Manual SIPLACE X Series 11
1
1 Introduction
Introduction
This service guide is a manual or reference work for performing service work on the SIPLACE® X-Series
placement machines.
1.1
1.1 Safety Instructions
Safety Instructions
1.1.1
1.1.1 Conventions for the use of safety instructions
Conventions for the use of safety instructions
This manual contains notes that must be observed to guarantee your personal safety and to avoid dam-
age to equipment. These notes are highlighted by warning triangles and are indicated as follows accord-
ing to the level of risk:
DANGER
Nonobservance of these safety instructions may cause injury to personnel and damage to the
machine!
► Please observe the safety instructions in the user manual of the relevant machine for all
work!
DANGER
Definition
For the purposes of this manual, this indicates that fatal or severe injuries or considerable dam-
age to property will occur if this hazard warning is not observed.
WARNING
Definition
For the purposes of this manual, this indicates that fatal or severe injuries or considerable dam-
age to equipment may occur if these warning instructions are not followed.
CAUTION
Definition
For the purposes of this manual, this indicates that minor injuries or damage to property may
occur if this caution is not observed.
NOTICE
Definition
For the purposes of this manual, this note provides information about the product or indicates
a part of the manual that requires particular attention.