00194440-10_SM_X-Series_Customer_en.pdf - 第195页
Service Work 3.7.1 Replacing the X-Series COT Insert [03015680-xx] X-Series C OT Insert Service Manual SIPLACE X Series 195 3.7 3 . 7 X - S e r ie s C O T I n s e r t X-Series COT Insert 3.7.1 3 . 7 . 1 R e p la c in g t…
Service Work
Modular PCB Conveyor System 3.6.22 Overview of the Electrical Components
194 Service Manual SIPLACE X Series
3.6.22.6
3.6.22.6 Extension Controller Board TSP 301E for Dual Conveyors [00370398-xx]
Extension Controller Board TSP 301E for Dual Conveyors [00370398-xx]
Overview
1. Conveyor control TSP 301E
2. Access to conveyor control
3. Transport direction
The extension board TSP 301E, for dual conveyors, (1)
is situated on the right side of the middle section of the
machine (2), together with the TSP 301 conveyor control.
The conveyor control is secured with a lockable door.
For terminal assignment details, please refer to the cur-
rent version of the circuit diagram folder.
Service Work
3.7.1 Replacing the X-Series COT Insert [03015680-xx] X-Series COT Insert
Service Manual SIPLACE X Series 195
3.7
3.7 X-Series COT Insert
X-Series COT Insert
3.7.1
3.7.1 Replacing the X-Series COT Insert [03015680-xx]
Replacing the X-Series COT Insert [03015680-xx]
Equipment required
▪ Fit-up aid [03015976-xx]
▪ Suitable lifting device (e.g. hand-operated crane)
Overview
Removal/installation
► Attach the fit-up aid (2) to the fixtures provided (1) on the COT insert.
► Fix the lifting device to the eyelet (3) of the fit-up aid (2).
1. COT insert assembly
2. Connection cables and hoses
► The connection cables and hoses (2) are located be-
hind the COT insert – in the space leading to the ma-
chine base (under the nozzle changer).
► Dismantle the nozzle changer.
► Mark the allocation of all press-fit connections so that
you can restore the connections later, with the new
cables.
⇨ Use the detailed circuit diagrams provided with the
machine to help you.
► Unplug all connectors and hoses connected to the
COT insert.
1
2
CAUTION!
Heavy machine part!
The COT insert is heavy. To lift it out, you will need to use
the fit-up aid and a suitable lifting device (hand-operated
crane etc.).
1. Fixtures
2. Fit-up aid
3. Eyelet
1
1
3
2
NOTICE
Marking the position
The COT insert can be installed at different positions in the machine location. Mark the position
of your COT insert, to ensure that this is subsequently returned to its original position.
Service Work
X-Series COT Insert 3.7.1 Replacing the X-Series COT Insert [03015680-xx]
196 Service Manual SIPLACE X Series
► Move the COT insert into its final position (to the previously marked installation position).
Take care not to damage the cables and hoses.
► Loosely screw in the fitting screw and the fastening screws.
► Tighten the fitting screw first.
► Tighten the fastening screws.
► Fit the nozzle changer.
See also
6.4.1 Control Unit on Cutter [ ➙ 376]
6.4.2 Control Unit on Cutter (CAN Nodes) [ ➙ 377]
► Loosen the screws fastening the COT insert (1).
► Loosen the fitting screw (2) on the inside of the ma-
chine.
► Lift the complete COT insert out of the machine and
place it on a suitable surface (four wooden blocks
etc.).
► Make sure that you do not damage any valves, con-
nection cables, hoses etc.
► Attach the fit-up aid to the new COT insert and lift it
into the machine, with the help of the lifting device.
► Reconnect all cables.
1
1
1
1
2
1
CAUTION
Observe the specified order!
The fitting screw must be tightened first, before you tighten the other fastening screws.