00194440-10_SM_X-Series_Customer_en.pdf - 第250页

Measuring Equipmen t and Tools Compressed Air Testing Device [00311487-01] 4.1.1 Scope of Delivery 250 Service Manua l SIPLACE X Series 4.7 4 . 7 C o m p r e s s e d A ir T e s t in g D e v ic e [ 0 0 3 1 1 4 8 7 - 0 1 ]…

100%1 / 384
Measuring Equipment and Tools
4.1.1 Scope of Delivery Track Signal Tester [00343785-01]
Service Manual SIPLACE X Series 249
4.4
4.4 Track Signal Tester [00343785-01]
Track Signal Tester [00343785-01]
4.5
4.5 Track Signal Tester [00322510-01]
Track Signal Tester [00322510-01]
4.6
4.6 Belt Tension Device [00326015-01]
Belt Tension Device [00326015-01]
Use:
The track signal tester is used to test the track signals of
the incremental measurement system for the gantry axes
(from SIPLACE HS50).
Use:
The track signal tester is used to test the track signals of
the incremental measurement system - particularly for
the head axes. It is also used for the track signals of the
gantry axes on older SIPLACE machines (S20, F4).
Use:
The belt tension measuring device is used to measure
the belt tensions (toothed belt) at the machine.
Measuring Equipment and Tools
Compressed Air Testing Device [00311487-01] 4.1.1 Scope of Delivery
250 Service Manual SIPLACE X Series
4.7
4.7 Compressed Air Testing Device [00311487-01]
Compressed Air Testing Device [00311487-01]
4.8
4.8 Location Tester
Location Tester
Use:
The compressed air tester is used to set the air blast at
the C&P6 and C&P12 placement heads in the SIPLACE
placement machines.
Use:
The location tester is used to check the feeder connec-
tions at the communication unit of the changeover table.
Measuring Equipment and Tools
4.1.1 Scope of Delivery Calibration Tool [03010565-xx]
Service Manual SIPLACE X Series 251
4.9
4.9 Calibration Tool [03010565-xx]
Calibration Tool [03010565-xx]
4.10
4.10 Calibration Tool [03034148-xx]
Calibration Tool [03034148-xx]
4.11
4.11 Calibration Nozzle for TwinHead [03008862-xx]
Calibration Nozzle for TwinHead [03008862-xx]
Use:
The calibration tool [03010565-xx] is used for calibration
of the DLM, CPP, P&P heads, TwinHead and PCB cam-
era.
Use:
The calibration tool is used for the following placement
heads:
▪ C&P20
▪ C&P20 A
▪ C&P20 M
▪ C&P20 P
▪ CPP (only at X4i S without stationary camera)
Use:
The calibration nozzle is used to calibrate the D axis of
the TwinHead or P&P head.
NOTICE!
This nozzle is no longer needed from SW705.03.