00194440-10_SM_X-Series_Customer_en.pdf - 第34页
Overview of the Modules Electrical System 2.2.4 Power Supply [00354626-xx] 34 Service Manual SIPLACE X Series 2.2.4 2 . 2 . 4 P o w e r S u p p ly [ 0 0 3 5 4 6 2 6 - x x ] Power Supply [00354626-xx] Overview 2.2.5 2 . 2…
Overview of the Modules
2.2.3 Computer Unit with BoxPC Electrical System
Service Manual SIPLACE X Series 33
2.2.3
2.2.3 Computer Unit with BoxPC
Computer Unit with BoxPC
Computer unit with BoxPC [00351894-xx]
X series placement machines from machine number 600
onward and in X4I machines are equipped with box PCs
in the computer unit.
Depending on the machine type and the configuration up
to three box PCs are used.
Position of assemblies in the computer unit
1. 4 port USB hub 2.0
2. Ethernet switch (only for optional 3D sensor)
3. Video multiplexer
4. Computer 1:
Station computer (up to SW 60x)
Vision computer (from SW 70x)
5. Computer 2:
Machine controller (MC) (up to SW 60x)
Station computer / MC (from SW 70x)
6. Computer 3:
Additional box PC - only for optional 3D sensor (not
for X4I)
NOTICE!
An external DVD drive is supplied with the delivery pack-
age.
From SW702 (X series from SW703) onwards, X4I ma-
chines are supplied with higher performance BoxPCs
[03072079-xx]. This means that machine control and the
Vision function are handled by only one BoxPC.
Overview of the Modules
Electrical System 2.2.4 Power Supply [00354626-xx]
34 Service Manual SIPLACE X Series
2.2.4
2.2.4 Power Supply [00354626-xx]
Power Supply [00354626-xx]
Overview
2.2.5
2.2.5 Main Distributor
Main Distributor
Signals and voltages can be processed and transmitted to the different system assemblies via the main
distribution unit in sector 2.
2.2.5.1
2.2.5.1 Main distributor (X series up to Ma. No. B325)
Main distributor (X series up to Ma. No. B325)
1. Front view
2. Side view.
The power supply unit is mounted on a compact rack unit
and is located in the left-hand middle section of the ma-
chine. A lockable door prevents access to the power sup-
ply.
1
2
Main distributor (X-Series up to machine number B325)
[03010004-xx]
1. Terminal strip X1qa (GND, +5 V, +15 V, -15 V,
+24 V, various signals)
2. DC/DC converter for illumination of all cameras
(PCB, component and stationary cameras) in place-
ment area 2
3. Control board for illumination, Vision system for sta-
tionary cameras of TwinHead (A4)
4. CAN-Bus I/O module (A1)
5. Connector block (connection X2qa - X6qa, X71qa -
X74qa and X9qa - X24qa)
6. 8-fold AND connection for safety circuit (A5)
7. Socket for Interface 1-Wire CAT5
Overview of the Modules
2.2.5 Main Distributor Electrical System
Service Manual SIPLACE X Series 35
2.2.5.2
2.2.5.2 Main distributor (X series from Ma. No. B326)
Main distributor (X series from Ma. No. B326)
Main distributor (X-Series from machine number B326,
X4I) [03046225-xx]
1. Terminal strip X1qa (GND, +5 V, +15 V, -15 V,
+24 V, various signals)
2. DC/DC converter for illumination of all cameras
(PCB, component and stationary cameras) in place-
ment area 2
3. Socket for Interface 1-Wire CAT5
4. CAN-Bus I/O module (A1)
5. Connector block (connection X2qa - X6qa, X71qa -
X74qa and X9qa - X24qa)
6. Relay K2 switches the compressed air supply for the
placement heads off (can be configured in the station
software)