YSP20_Users_E.pdf - 第234页
Chapter 3 Lubrication points 1. List of lubrication locations 3-1 1.1 Applicable grease 3-1 1.2 Grease gun 3-1 2. List of lubrication locations 3-2 2.1 X- and Y -axis 3-2 2.1.1 X1-axis and X2-axis 3-2 2.1.2 Y1-axis and Y…
General Contents
Introduction
1. About this manual i
2. Maintenance list ii
Chapter 1 Maintenance
1. Maintaining machine performance 1-1
1.1 Essential conditions and working environment 1-1
1.2 Importance of periodic inspections and cleaning 1-2
2. Preparing for maintenance tasks 1-3
2.1 Maintenance tools 1-3
2.1.1 Cleaning tools 1-3
2.1.2 Lubricating tools and grease 1-3
2.2 Required tools 1-4
Chapter 2 Inspection and maintenance
Before beginning work 2-1
1. Daily maintenance items 2-2
1.1 Daily inspection 2-2
1.2. Cleaning the camera protective glass 2-3
2. Periodic maintenance items 2-4
2.1 Periodic inspection (Weekly/Monthly) 2-4
2.1.1 Parts to be replaced during periodic replacement 2-4
2.1.2 List of periodic inspection checkpoints 2-4
2.2 Parts recommended for periodic replacement 2-6
2.3 Adjusting the conveyor belt tension 2-7
2.4 Inspecting and cleaning the air/mist filters 2-8
3. Replacing the consumable parts 2-10
3.1 Replacing the squeegee unit 2-10
3.2 Replacing the squeegee scraper 2-11
3.2.1 Metal squeegee scraper 2-11
3.2.2 Urethane squeegee scraper 2-12
3.3 Suction-blower unit 2-14
3.3.1 Cleaning and replacing the filter 2-14
3.3.2 Replacing the blower hose 2-15
3.4 Cleaning/replacing filter for mask vacuum chuck 2-17
3.5 Replacing the conveyor belt 2-18
EMN3192110
Chapter 3 Lubrication points
1. List of lubrication locations 3-1
1.1 Applicable grease 3-1
1.2 Grease gun 3-1
2. List of lubrication locations 3-2
2.1 X- and Y-axis 3-2
2.1.1 X1-axis and X2-axis 3-2
2.1.2 Y1-axis and Y2-axis 3-3
2.2 Printing head 3-4
2.2.1 SY-axis 3-4
2.2.2 SZ-axis 3-4
2.3 Mask table ASSY 3-5
2.3.1 MY-axis 3-5
2.3.2 MZ-axis 3-5
2.4 Conveyor unit 3-6
2.4.1 PU1-axis and PU2-axis 3-6
2.4.2 W1-axis and W2-axis (Conveyor auto width adjustment) 3-7
2.5 Suction-blower unit 3-8
2.5.1 Blower hose guide 3-8
Appendix
1. Specifications A-1
1.1 Air regulator unit A-1
1.2 Power connection terminals A-2
1.3 Connection between machines A-3
1.3.1 PREVIOUS INTERFACE connector A-4
1.3.2 NEXT INTERFACE connector A-6
The instruction manual of this machine is written for those who operate
this machine.
Please read this manual carefully for correct operations and pay
special attention to safety precautions.
After reading through this manual, please use this manual as an
occasional reference and keep it within reach.
Introduction
Contents
1. About this manual i
2. Maintenance list ii