YSP20_Users_E.pdf - 第236页
i Introduction 1. About this manual Descriptions in this manual stress important maintenance items that are essential for maintaining equipment perfor mance. Information given here mainly describes making inspections, cl…
The instruction manual of this machine is written for those who operate
this machine.
Please read this manual carefully for correct operations and pay
special attention to safety precautions.
After reading through this manual, please use this manual as an
occasional reference and keep it within reach.
Introduction
Contents
1. About this manual i
2. Maintenance list ii
i
Introduction
1. About this manual
Descriptions in this manual stress important maintenance items that are essential for maintaining equipment
performance. Information given here mainly describes making inspections, cleaning and greasing as well as
procedures for replacing consumable parts in each location given in a step-by-step format. This manual is
comprised of the following chapters.
Chapter 1 Maintenance
Describes conditions and environments to use for maintaining equipment performance. The importance of making daily
checks and performing cleaning tasks is explained. Setups to make before starting maintenance work, maintenance tools
as well as the necessary tools are also described.
Chapter 2 Inspection, maintenance and adjustment
Describes inspection and maintenance that should be performed daily or periodically to use the machine safely and
avoid unnecessary trouble. Also describes methods for replacing parts subject to wear such as squeegees.
Chapter 3 Lubrication points
Indicates lubrication points and describes methods for lubricating the ball screws and guides of each axis.
w
WARNING
ALWAYS THOROUGHLY READ "SAFETY INSTRUCTIONS " STATED AT THE BEGINNING OF THIS DOCUMENT BEFORE STARTING
THE MAINTENANCE WORK.
ii
Introduction
2. Maintenance list
n
Inspection list
: Perform maintenance. : Replace or adjust if necessary after inspection M : Month H : Hour
: Check or adjust after replacement : Contact us. - : Not required.
Inspection
Cleaning/
Lubrication
Replacement
Section Check item
Weekly
Monthly
Bimonth-
ly
3 Mon. 6 Mon.
Clean-
ing
Lubri-
cation
Frequency Action
Printing head
SY-axis Guide -
SZ-axis
Ball screw
-
Guide -
Linear bushing -
Squeegee unit Scraper
Daily
inspection
- -
Cleaner
Cleaner main unit Operation - -
Cleaner head
Condition and
operation
- -
Suction unit hose
Condition
- -
Guide -
Filter inside
suction unit
Condition and
operation
- -
Conveyor unit
Main stopper
Condition and
operation
-
Edge clamp
Condition and
operation
-
Exit stopper Operation -
Conveyor belt
Condition and
operation
- -
Push-up plate
Condition and
operation
- -
PU-axis
Ball screw
-
Guide -
Guide shaft -
W-axis timing belt Condition - - -
W-axis conveyor
auto width
adjustment
Ball screw
-
Guide -
Mask vacuum
Operation
- - -
Vacuum filter - -
Mask ASSY
MY-axis Ball screw -
MZ-axis
Guide
-
Ball screw -