YSP20_Users_E.pdf - 第24页
xxii Safety instructions Potential hazard Could cause machine damage (collisions with the head, etc.). T o avoid hazard V erify that no objects have been placed on the batch change carrier's (for YSM40) top cover . …
xxi
Safety instructions
Potential
hazard
Machine damage
To avoid
hazard
If machine is not to be used for 6 months or more, block off the solvent path to protect solvent
pump.
Applicable
machines
All solder paste printers
Case
Maintenance
Potential
hazard
Might disable machine functions
To avoid
hazard
Periodically replace USP battery since it has a limited service life.
Applicable
machines
Machines equipped with UPS (option)
Case
Maintenance
Potential
hazard
Machine damage
To avoid
hazard
Read manuals and use correct procedure to operate machine.
Applicable
machines
YS24X (machines equipped with sATS II)
Case
All case
xxii
Safety instructions
Potential
hazard
Could cause machine damage (collisions with the head, etc.).
To avoid
hazard
Verify that no objects have been placed on the batch change carrier's (for YSM40) top cover.
Applicable
machines
Feeder exchange carriage (YSM40)
Case
Setup
Potential
hazard
The top tape could make contact with the head, possibly causing machine damage.
To avoid
hazard
When a feeder is improperly extracted from its set position, be sure that the feeder has been
completely extracted before reinserting it into its set position.
Applicable
machines
YSM40
Case
Setup
xxiii
Safety instructions
3.4 Label positions
The following warning/caution labels are attached to the YAMAHA products to ensure safe and correct use.
Check that the information on each label is clearly legible and comply with the instructions.
n
NOTE
Basically, labels are attached to the positions shown below, although they may differ slightly depending on the
machine model.
n
Label positions
Warning/caution labels
YSP20 front view (right-to-left flow)
1
1
1
4
4
7
5
2
N
Labels
3
6 (Two each on left and right sides)
3
3
2
2
1
2
2
5
7
2
6
93201-N3-00