YSP20_Users_E.pdf - 第60页
1-21 1 Part names and functions n T able Axis configuration Squeegee Squeegee head Mask Mask SRA-axis SY A-axis SZA-axis Plus direction Minus direction MY A2-axis MY A1-axis MZA-axis Squeegee Squeegee head SRB-axis SYB-a…
1-20
1
Part names and functions
7. Servo-controlled axes
The mechanical units of this machine move along the following servo-controlled axes. Other mechanical
devices are driven by compressed air.
n
Dual-lane
Plus direction
Minus direction
W2-axis
Axis configuration
Lane 1
Lane 2
W1-axis
Y1-axis
Y2-axis
PU1-axis
PU2-axis
X2-axis
X1-axis
Conveyor rail
Board clamp unit (Board clamp table)
Board clamp unit (Board clamp table)
63124-N3-00
n
Axis functions
Unit name Axis Function
Board clamp unit
(Board clamp table)
X1, X2 Moves the board clamp table along the X-axis.
PU1, PU2 Raises and lowers the push-up plate.
Conveyor
Y1, Y2 Moves the conveyor unit along the Y-axis.
W1, W2 Adjusts the conveyor width.
TIP
You can manually move each unit on the operation screen. See "4.1 Move Axis screen" in Chapter 7 for more details.
1-21
1
Part names and functions
n
Table
Axis configuration
Squeegee
Squeegee head
Mask
Mask
SRA-axis
SYA-axis
SZA-axis
Plus direction
Minus direction
MYA2-axis
MYA1-axis
MZA-axis
Squeegee
Squeegee head
SRB-axis
SYB-axis
SZB-axis
MYB2-axis
MYB1-axis
MZB-axis
N Table A
N Table B
As viewed from front of RL (right-to-left flow) machine
63125-N3-00
Unit name Axis Function
Squeegee head
SY Moves the squeegee head parallel to the Y-axis.
SZ Moves the squeegee head vertically.
SR Adjusts the squeegee scraper angle. (3S head only)
Printing table
MY1 Moves the mask stage along the Y-axis.
MY2 Moves the mask stage along the R-axis.
MZ Adjusts the mask stage along the Z-axis.
Chapter 2 Basic operations
This chapter explains how to start up the machine and turn it off, as well as basic menus displayed on the operation screen.
We recommend you read this chapter while actually operating the machine as instructed.
Contents
1.
Canceling emergency stop and clearing an error
2-1
1.1 Canceling emergency stop 2-1
1.2 Clearing an error 2-2
1.3 Typical errors and troubleshooting 2-3
2. Starting and stopping the machine 2-9
2.1 Inspecting before operation 2-10
2.2 Starting the machine 2-11
2.3 Turning off the machine 2-13
5
5
6