YSP20_Users_E.pdf - 第235页
The instruction manual of this machine is written for those who operate this machine. Please read this manual carefully for correct operations and pay special attention to safety precautions. After reading through this m…
Chapter 3 Lubrication points
1. List of lubrication locations 3-1
1.1 Applicable grease 3-1
1.2 Grease gun 3-1
2. List of lubrication locations 3-2
2.1 X- and Y-axis 3-2
2.1.1 X1-axis and X2-axis 3-2
2.1.2 Y1-axis and Y2-axis 3-3
2.2 Printing head 3-4
2.2.1 SY-axis 3-4
2.2.2 SZ-axis 3-4
2.3 Mask table ASSY 3-5
2.3.1 MY-axis 3-5
2.3.2 MZ-axis 3-5
2.4 Conveyor unit 3-6
2.4.1 PU1-axis and PU2-axis 3-6
2.4.2 W1-axis and W2-axis (Conveyor auto width adjustment) 3-7
2.5 Suction-blower unit 3-8
2.5.1 Blower hose guide 3-8
Appendix
1. Specifications A-1
1.1 Air regulator unit A-1
1.2 Power connection terminals A-2
1.3 Connection between machines A-3
1.3.1 PREVIOUS INTERFACE connector A-4
1.3.2 NEXT INTERFACE connector A-6
The instruction manual of this machine is written for those who operate
this machine.
Please read this manual carefully for correct operations and pay
special attention to safety precautions.
After reading through this manual, please use this manual as an
occasional reference and keep it within reach.
Introduction
Contents
1. About this manual i
2. Maintenance list ii
i
Introduction
1. About this manual
Descriptions in this manual stress important maintenance items that are essential for maintaining equipment
performance. Information given here mainly describes making inspections, cleaning and greasing as well as
procedures for replacing consumable parts in each location given in a step-by-step format. This manual is
comprised of the following chapters.
Chapter 1 Maintenance
Describes conditions and environments to use for maintaining equipment performance. The importance of making daily
checks and performing cleaning tasks is explained. Setups to make before starting maintenance work, maintenance tools
as well as the necessary tools are also described.
Chapter 2 Inspection, maintenance and adjustment
Describes inspection and maintenance that should be performed daily or periodically to use the machine safely and
avoid unnecessary trouble. Also describes methods for replacing parts subject to wear such as squeegees.
Chapter 3 Lubrication points
Indicates lubrication points and describes methods for lubricating the ball screws and guides of each axis.
w
WARNING
ALWAYS THOROUGHLY READ "SAFETY INSTRUCTIONS " STATED AT THE BEGINNING OF THIS DOCUMENT BEFORE STARTING
THE MAINTENANCE WORK.