TR7500_Series_Software_v29_En.pdf - 第102页

Test Research Inc. 80 TR7500 Series User Guide – Software v.2.9.0  [Delete] － Selec t a com ponent on the co m ponent list f irst and press [Delete] to delete it.  [View ] － Select a compo nent at component list f irst…

Test Research Inc.

TR7500 Series User Guide –Software v.2.9.0 79

Result:

The component,

that has enough similarity,

will be set.

You can modify

the name or angle.

Figure 136: Non-CAD Teach Procedure 3

(6) [Name & Type Setting] － Set [Name Index], [S/N From] and [Type] here for a new

component.

(7) [CAD File] － Use [New], [Load] or [Save] an AOI file. [New] creates a new AOI file and

the current setting will be cleared. [Load] opens a saved AOI file. [Save] means to save

the current AOI file to a specific path.

(8) [CAD Data] － The component data will be listed in the field. Edit the CAD data here.

 [Add] － Press the button and the system will create a component into CAD file

according to [Name&Type Setting], [TB Select], [Theta] and the selecting tool.

 [Modify] － Select a component first and press [Modify] then the system will change

the data according to [Name&Type Setting], [TB Select], [Theta] and the selecting

tool.

 [Insert] － Select a position to insert component data in the component list first and

press the button to add a component according to [Name&Type Setting], [TB

Select], [Theta] and the selecting tool..

Test Research Inc.

80 TR7500 Series User Guide –Software v.2.9.0

 [Delete] － Select a component on the component list first and press [Delete] to

delete it.

 [View] － Select a component at component list first and press [View] . Then the

camera will move to the location of the component.

 [TB Select] － Select whether the component is on top or bottom side.

 [Arrowhead button] － Select a component first, then press up or down arrow to

move its sequence.

 [CAD table] － Double click on a field and edit data directly.

Figure 137: Theta Data Field

(9) [Theta] － A tool to define the angle of components.

When using the box tool to create a component, check [Apply] and select an angle to add

[Theta] data at one time. If [Apply] is not checked, the default of [Theta] is zero.

Test Research Inc.

TR7500 Series User Guide –Software v.2.9.0 81

Figure 138: Set Theta Data When Using Box Tool

Select a [Theta] field and select an angle to change the data directly.

Figure 139: Edit Theta Angle Directly