TR7500_Series_Software_v29_En.pdf - 第95页
Test Research Inc. TR7500 Series User Guide – Software v.2.9.0 73 Figure 127 : Angle Measurin g Tool Example Figure 128 : Theta Alignm ent Window
Test Research Inc.
72 TR7500 Series User Guide –Software v.2.9.0
(3) [Tools] － Use these four tools, plus the Large Component Tool, to create a CAD file.
ICON
NAME DESCRIPTION
Box
The Box tool defines the coordinates of components. Click on
the Box button then a box tool will appear. The box can be
moved, rotated and resized using the mouse. The system will
set the center of the box as the component center.
Cross line
The Cross Line tool defines the coordinates of components. The
system will set the center of the cross as the component center.
Angle
Measuring
The Angle Measuring tools defines the angle of components.
Use this to measure the rotation of components with special
angles
Theta
Alignment
The Angle Measuring tool produces a number with a decimal.
The Theta Alignment tool is used to adjust the angle to be a
rounded integer.
Figure 125: Box Tool Examples
Figure 126: Cross Line Tool Example
Test Research Inc.
TR7500 Series User Guide –Software v.2.9.0 73
Figure 127: Angle Measuring Tool Example
Figure 128: Theta Alignment Window
Test Research Inc.
74 TR7500 Series User Guide –Software v.2.9.0
ICON
NAME DESCRIPTION
Large
Component
Tool
A tool to define the coordinates of components. If the
component size is larger than an FOV, use this tool to get the
center of the component.
Step1. Move the cross line tool to the upper-left corner of the component and
press [1] to get the first corner position.
Figure 129: Large Component Tool, Step 1
Step2. Move the cross line tool to other corners and press [2], [3] and [4]
respectively to get the coordinates with the same method.