TR7500_Series_Software_v29_En.pdf - 第132页
Test Research Inc. 110 TR7500 Series User Guid e –Softwa re v.2.9.0 Figure 179 : Auto-Loading Setting Dialog Press [New] to add a new entry. Figure 180 : Auto-Load Bar code Setting Di alog Input the barcode pa t tern…
Test Research Inc.
TR7500 Series User Guide –Software v.2.9.0 109
Figure 177: Bareboard Dialog
[Yes] – The system will check all the inspection boxes by using reverse logic in
order to make sure all the boxes are functional
[No] – The system will check all the inspection boxes by using reverse logic
including those already set to [Inverse Logic].
3.10.21 Inspection Type Setting
This function is to display only the specified component(s) when inspecting. All components
on the board are still inspected but this shows the failure of specified components only. You
can start the function to help tuning.
When selecting [Inspection Type Setting], the following window shows. You can select one or
press [Ctrl] and select more components to enable. Then press [OK] to complete the setting.
Figure 178: Select Type Dialog
3.10.22 Auto Loading
The [Auto-Loading] function allows the system to load a program according to the barcode.
Select [U
TILITY
>
A
UTO
L
OADING
>
E
NABLED
A
UTO
L
OADING
], the window below will be
displayed.
Test Research Inc.
110 TR7500 Series User Guide –Software v.2.9.0
Figure 179: Auto-Loading Setting Dialog
Press [New] to add a new entry.
Figure 180: Auto-Load Barcode Setting Dialog
Input the barcode pattern in the [Barcode] field and specify the program path
according to this specific pattern. [*] means any number.
After [Enabled Auto Loading] is activated, the system will always ask for the barcode
when a user loads a program. If the barcode does not match the saved barcode
pattern, the system will require a file path. Users can use the browse function to
redirect the path of the program file.
3.10.23 User Manager
This function works only if there is a DWORD, [LoginFlag], and the value in registry is [1].
Test Research Inc.
TR7500 Series User Guide –Software v.2.9.0 111
Figure 181: User Manager Dialog
The User Manager can use this function to classify all users. Users have to input their name
and password before they can enter the program. The time of login and logout will be
recorded in [login.txt] file under [C:\WINDOWS\system32].
The default user name is [administrator] and password is [1234]. Only the user with power of
Supervisor can use this function to Add, Delete or Modify other users.
3.10.23.1 New
Input [User Name] and select the power level for that user. Press [OK] to add a new user.
The password for a new user is [1234]. A new user can change this password by the
[Change Password] function after logging in. The explanation for each power level is below:
[Supervisor] – User can do perform all functions.
[Engineer] – User can perform all functions except [User Manager].
[Operator] – User can inspect only and cannot modify the project.
Figure 182: User Update Dialog