TR7500_Series_Software_v29_En.pdf - 第184页
Test Research Inc. 162 TR7500 Series User Guid e –Softwa re v.2.9.0 7 L IGHT A DJUSTM ENT Push the [LIGHT] set t ing button to edit li g hting control. Figure 269 : Light Button fo r Lighting Con trol Editor 7.1 Lig htin…
Test Research Inc.
TR7500 Series User Guide –Software v.2.9.0 161
6.8 Motion Controller
1
2
3
4
5
6
7
Figure 268: Motion Control Outlook & Functions
(1). [Distance Scaling]–Choose the moving magnification of step.
(2). [Step]–Input the moving scale (pulse) of X-Y Table.
(3). [X, Y]– Refers to the coordinates of the camera on X-axis and Y-axis.
(4). [Lock/Unlock]– Press to toggle lock/unlock of X-Y Table motion.
(5). Direction Arrows– Press to move Table in the corresponding direction. For
example, press
to move the camera to the front-left side with a specific pulse
([Step] multiplied by [Scaling]).
(6). Central Block– Press to minimize the motion control box window. Double-click the
minimized tab to maximize the window.
(7). [Z] – Used only on specially modified systems.
Test Research Inc.
162 TR7500 Series User Guide –Software v.2.9.0
7 L
IGHT
A
DJUSTMENT
Push the [LIGHT] setting button to edit lighting control.
Figure 269: Light Button for Lighting Control Editor
7.1 Lighting Control Editor
Figure 270: Lighting Control Editor
Test Research Inc.
TR7500 Series User Guide –Software v.2.9.0 163
(1). LED Control
Figure 271: LED Control
This controller graphically expresses every regional position of the LED board.
The lower part of the graphic refers to the light source of the front of the board. It
is adjusted that the lighting can divide into 36 zones. Every circle represents an
adjusted zone.
Every district of 28 zones (except the central top lighting area) allows for
separate adjustment of red, green and blue lighting. Only the white light can be
adjusted in the central area.
Open or close a zone to adjust by clicking on it. Toggle an open zone to closed
or vice versa.
Adjust an area by clicking and dragging the lower right corner of the displayed
box.
Put the mouse at a one of the zones then the top area of the control graphic will
show the light setting value of that area. [For example
].
(2). [Range] – Set electric current for LED. (40mA, 60mA, 80mA, and 100mA). The
larger the electric current is, the brighter the LEDs are.
[White Balance] – When the current lighting is set to White Balance, you can check
[Enable] to review the image that is white balanced. The control bar below is to
adjust the brightness of the image.
(3). [Intensity] – Adjust LED RGB lighting brightness (0~255). The larger the values are,
the brighter the LEDs are.
(4). [All Color] – This function is only for the TR7500DT system.