2OM-1088-002.pdf - 第142页
Tg0699-PM-D2 0207-001 Chapter 1 3-25 3.5 "Recog. Error" T ab *2 *1 *3 3.5 "Recog. Error" T ab Displayed is the recognition error data of the current model. • • • • • Sheet Layout When the "Recog.…
Tg0699-PM-D2
0207-001 Chapter 1 3-24
3.4 "Time Data" Tab
*11 Maint. Stop Time
This indicates the period of time during which the machine was
stopped for the following maintenance operations.
• Manual Cleaning of Screen
• Replenishment of Cleaning Solvent
• Replenishment of Cleaning Paper
• Replenishment of Solder Paste
*12 Error Stop Time
This indicates the period of time ("*13 Error Alarm Time" + "*14
Recovery Time") during which the machine was reset to its
normal condition after an error alarm was issued.
*13 Error Alarm Time
This indicates the period of time during which the machine
issued an error alarm.
*14 Recovery Time
This indicates the period of time required for the machine to be
reset to its normal condition.
*15 Others
This indicates the period of time required for setup, program
change, and idling operations.
*16 Test Mode Time
This indicates the period of time during which the machine was
operated in the "TEST" mode (operation mode).
*17 SET-UP Time
This indicates the period of time during which the [OPERATION/
SET UP] switch on the front operation panel was set to the "SET
UP" side.
Tg0699-PM-D2
0207-001 Chapter 1 3-25
3.5 "Recog. Error" Tab
*2
*1
*3
3.5 "Recog. Error" Tab
Displayed is the recognition error data of the current model.
••
••
• Sheet Layout
When the "Recog. Error" tab is pressed in the "PRGM. MNG.
DATA" window (submenu), the following tab sheet appears.
Fig. 3C17 "Recog. Error" Tab Sheet
••
••
• Sheet Composition
*1 #1 ERROR (/Total P.E.C. Error)
This indicates the total number of errors on the first fiducial mark
and the ratio based on the total number of P.E.C. recognition
errors.
*2 #2 ERROR (/Total P.E.C. Error)
This indicates the total number of errors on the second fiducial
mark and the ratio based on the total number of P.E.C. recogni-
tion errors.
*3 Total P.E.C. Recog. Error
This indicates the total number of errors that were detected in
P.E.C. recognition processing.
Tg0699-PM-D2
0207-001 Chapter 1 3-26
4. "FILE ON." Submenu
*1 *2 *3 *4
4. "FILE ON." Submenu
"Save/Read" of print data is performed, using the floppy disk drive.
••
••
• Window Layout
When the [File Operation] button is pressed on the machine per-
formance data sub-menu bar, the following sub-menu window
appears.
Fig. 3C18
••
••
• Window Composition
*1 Data Type Button
The following buttons are arranged.
[Management Data] :
The management data is saved in a floppy disk.
The management data file so saved can not be read in the
machine.
[Pattern Program Management Data] :
The pattern program management data is saved in a floppy disk.
The pattern program management data file so saved can not be
read in the machine.