2OM-1088-002.pdf - 第175页

Tg0699-PM-D2 0207-001 Chapter 1 4-27 4.1 "Machine Offset" T ab *1 *2 *3 4.1 "Machine Offset" T ab This tab sheet enables the operator to set offset values for each section of the machine. • • • • • Sh…

Tg0699-PM-D2

0207-001 Chapter 1 4-26

4. "Offset Data" Submenu

••

• Window Layout

When the [OFFSET DATA] button is pressed in the "SYSTEM"

submenu bar, the following window appears.

Fig. 3D17 "Offset Data" Window (Submenu)

••

• Window Composition

*1 Tabs

The "Offset Data" window (submenu) is provided with 3 tab

sheets.

Every time a tab is pressed, the corresponding tab sheet ap-

pears.

Table 3D5

Tabs Description

Machine Offset This tab sheet enables the operator to set offset values for each

section of the machine.

P.E.C. Recog. Camera This tab sheet enables the operator to set offset values and magni-

fications of the P.E.C. recognition camera and gain & level (contrast

and brightness difference) of the fiducial mark.

Screen Recog. Camera This tab sheet enables the operator to set offset values and magni-

fications of the screen recognition camera and gain & level (contrast

and brightness difference) of the fiducial mark.

Tg0699-PM-D2

0207-001 Chapter 1 4-27

4.1 "Machine Offset" Tab

*2 *3

4.1 "Machine Offset" Tab

This tab sheet enables the operator to set offset values for each

section of the machine.

••

• Sheet Layout

When "Machine Offset" tab is pressed at the "OFFSET DATA"

window (submenu), the following tab sheet appears.

Fig. 3D18 "Machine Offset" Tab Sheet

Tg0699-PM-D2

The offset can automatically be set

through the teaching operation.

Screen Distance : Enter an offset value in the text box,

based on the specified distance in the Z

direction between the underside of the

screen and the upper surface of the P.C.B.

for printing.

0207-001 Chapter 1 4-28

4.1 "Machine Offset" Tab

••

• Sheet Composition

*1 Offset Entry Area for Each Unit

Offset values can be entered for each unit.

Camera Stopper : When the P.C.B. stop position has devi-

ated from the table center, set the offset

data for the correction.

Fig. 3D19

Fig. 3D20