2OM-1088-002.pdf - 第354页
Tg0699-PM-D2 Apply grease with a brush. Note : If a large amount of grease is applied to the ball screw , it may be dispersed over a P .C.B. and the screen. After applying grease to the ball screw , brush the surface unt…
Tg0699-PM-D2
Fig. 5A45 Squeegee Head Section
Fig. 5A46 Squeegee Head Section
8. Half-Yearly Maintenance
0207-001 Chapter 3 1-34
⛎ᴤ
⛎ᴤ
ࠬࠠࠫࡋ࠶࠼Yゲ
࠾ࠕࠟࠗ࠼
Inject grease into the grease
nipple with a grease gun.
Lubrication
Squeegee Head Y-Axis Ball
Screw
Apply grease with a brush.
Note : If a large amount of
grease is applied to the
ball screw, it may be
dispersed over a P.C.B.
and the screen. After
applying grease to the
ball screw, brush the
surface until a small
amount of grease
remains.
Lubrication
Squeegee Head Y-Axis Linear
Guide
Guide Bushing for Squeegee
Up/Down Movement
Remove the squeegee cover
and apply grease with a brush
or spatula.
Lubrication
Tg0699-PM-D2
Apply grease with a brush.
Note : If a large amount of
grease is applied to the
ball screw, it may be
dispersed over a P.C.B.
and the screen. After
applying grease to the
ball screw, brush the
surface until a small
amount of grease
remains.
Lubrication
Y-Axis Ball Screw
Y-Axis Linear Guide
Apply grease with a brush.
Lubrication
Fig. 5A47 Screen Recognition X-Axis
Fig. 5A48 Squeegee Head Section
8. Half-Yearly Maintenance
0207-001 Chapter 3 1-35
Screen Recognition X-Axis
Linear Guide
Inject grease into the grease
nipple with a grease gun.
Lubrication
Screen Recognition X-Axis
Ball Screw
Apply grease with a brush or a
spatula.
Lubrication
Tg0699-PM-D2
Spline Shaft for Width
Adjustment
Apply grease with a brush or
a spatula.
Lubrication
Ball Screw for Width
Adjustment
Lubrication
Guide Bushing for Width
Adjustment
Lubrication
Apply grease with a brush or
a spatula.
Apply grease with a brush or
a spatula.
Spline Shaft for Width
Adjustment
Apply grease with a brush or
a spatula.
Lubrication
Ball Screw for Width
Adjustment
Lubrication
Guide Bushing for Width
Adjustment
Lubrication
Apply grease with a brush or
a spatula.
Apply grease with a brush or
a spatula.
Fig. 5A49 L Conveyor
Fig. 5A50 R Conveyor
8. Half-Yearly Maintenance
0207-001 Chapter 3 1-36