2OM-1088-002.pdf - 第20页
Safe-7 Tg0698-PM-D1 Safety Precautions Data may become unavailable due to breakdown or mishandling of the machine. It is strongly recommended that the hard disk data be periodically backed up with the network terminal (o…
Safe-6 Tg0698-PM-D1
Safety Precautions
0509-001
CAUTION
• Attach the internal lid and tighten the cap securely.
If the cap gets loose, adequate pressure may not be
applied or the solvent may leak out.
Even after the [EMERGENCY STOP] switch is pressed, note
that electrical power is supplied to the control device.
To shutdown the power to all loads, set the power breaker to
"OFF".
When an "Emergency Switch Off" function is required, it must be
prepared on the customer side.
Emergency Switch Stop : Emergency Interception of Controlled Load
Power Sources
Emergency Switch Off : Emergency Interception of All Load Power
Sources
Cap
Tank
Internal Lid
Solvent Tank
In principle, the overall operation of the machine including the
button operations on the operation panel and the touch screen
must be controlled by only one person.
If there are more than one, ensure good communication by giving loud
verbal instructions.
Safe-7 Tg0698-PM-D1
Safety Precautions
Data may become unavailable due to breakdown or mishandling of
the machine.
It is strongly recommended that the hard disk data be periodically
backed up with the network terminal (option).
CAUTION
0509-001
Safe-8 Tg0698-PM-D1
Safety Precautions
0509-001
Notes on Machine Operations
This machine uses energetic driving systems and high voltage.
This power and voltage is high enough to cause death or
serious injury.
To avoid this danger, respect the following guideline.
zz
zz
z The machine must be used with the covers being attached.
DANGER
WARNING
Only a well-trained person should operate the machine.
Do not allow any untrained person to operate the machine.
While the machine is running, keep yourself or an object away
from any moving mechanisms.
Keep your face and hands away from any moving parts of the
machine during operation.
When there is a problem with the machine, locate the cause and
assess the condition. Set the power breaker to "OFF".
After the problem has been rectified completely, reset the
machine to its normal condition.
When some industrial alcohol spills out of the solvent tank or the
pan during the operation, immediately stop the operation, turn
off the power supply, and wipe the spills with a rag, etc.
When the green lamp of the light tower is ON or flickering (ON and
OFF), it indicates that the static machine is in the "Automatic" mode
(standby mode).
CAUTION
In case of a disaster of any kind, earthquake, storm, flood, fire, or
lightning, immediately stop the machine and turn off the power supply.