2OM-1088-002.pdf - 第346页

Tg0699-PM-D2 8. Half-Y early Maintenance 0509-002 Chapter 3 1-27 T able 5A9 Maintenance Spots Description Grease Cleaning Check T ools, Nozzles, etc. Squeegee Squeegee Head 5A45 Lubrication DE1 Brush, Head Section Y-Axis…

100%1 / 491
Tg0699-PM-D2
Table 5A8
Maintenance Spots
Description
Grease
Cleaning
Check
Tools,
Nozzles,
etc.
Table Section X-Axis Ball Screw 5A35 Lubrication DE1 Brush,
Spatula
X-Axis Linear Guide 5A36 Lubrication DE1 Grease Gun,
Brush
Z-Axis Ball Screw 5A37 Lubrication DE1 Brush,
Spatula
Z-Axis Guide 5A37 Lubrication DE1 Brush,
Bushing Spatula
θ-Axis Ball Screw 5A38 Lubrication DE1 Brush,
Spatula
θ-Axis Linear 5A38 Lubrication DE1 Brush,
Guide Spatula
P.C.B. Chuck Ball Screw for Chute 5A39 Lubrication DE1 Brush,
Section Width Adjustment Spatula
Linear Guide for 5A39 Lubrication DE1 Brush,
Chute Width Spatula
Adjustment
Ball Screw for Chute 5A41 Lubrication DE1 Brush,
Width Adjustment Spatula
Linear Guide for 5A41 Lubrication DE1 Brush,
Chute Width Spatula
Adjustment
Backup Table Z-Axis 5A40 Lubrication DE1 Brush,
Guide Bushing Spatula
Backup Table Z-Axis 5A39 Lubrication DE1 Brush,
Ball Screw Spatula
Linear Guide for 5A42 Lubrication DE1 Brush,
P.C.B. Clamping Spatula
P.E.C. Recogni- P.C.B. Stopper 5A43 Lubrication DE1 Brush
tion Section Guide Bushing
X-Axis Linear Guide 5A43 Lubrication DE1 Brush,
Spatula
Y-Axis Ball Screw 5A44 Lubrication DE1 Brush,
Spatula
Y-Axis Linear Guide 5A44 Lubrication DE1 Brush
X-Axis Ball Screw 5A44 Lubrication DE1 Brush,
Spatula
8. Half-Yearly Maintenance
DE1: DAPHNE EPONEX GREASE No. 1
8. Half-Yearly Maintenance
0509-002 Chapter 3 1-26
Block Name Detailed Name
Fig.
No.
Tg0699-PM-D2
8. Half-Yearly Maintenance
0509-002 Chapter 3 1-27
Table 5A9
Maintenance Spots
Description
Grease
Cleaning
Check
Tools,
Nozzles,
etc.
Squeegee Squeegee Head 5A45 Lubrication DE1 Brush,
Head Section Y-Axis Ball Screw Spatula
Squeegee Head 5A45 Lubrication DE1 Grease Gun
Y-Axis Linear Guide
Screen Recognition 5A47 Lubrication DE1 Brush,
X-Axis Ball Screw Spatula
Screen Recognition 5A47 Lubrication DE1 Grease Gun
X-Axis Linear Guide
Guide Bushing for 5A46 Lubrication DE1 Brush,
Squeegee
Up/Down
Spatula
Movement
Screen Holder Y-Axis Ball Screw 5A48 Lubrication DE1 Brush
Section Y-Axis Linear Guide 5A48 Lubrication DE1 Brush
L Conveyor Spline Shaft for 5A49 Lubrication DE1 Brush,
Section Width Adjustment Spatula
Ball Screw for Width 5A49 Lubrication DE1 Brush,
Adjustment Spatula
Guide Bushing for 5A49 Lubrication DE1 Brush,
Width Adjustment
Spatula
R Conveyor Spline Shaft for 5A50 Lubrication DE1 Brush,
Section Width Adjustment Spatula
Ball Screw for 5A50 Lubrication DE1 Brush,
Width Adjustment Spatula
Guide Bushing for 5A50 Lubrication DE1 Brush,
Width Adjustment Spatula
Cover Section Front Safety Door 5A51 Lubrication DE1 Brush
Gas Damper (Upper)
Front Safety Door 5A52 Lubrication DE1 Brush
Gas Damper (Lower)
Rear Safety Door 5A53 Lubrication DE1 Brush
Gas Damper (Upper)
Rear Safety Door 5A54 Lubrication DE1 Brush
Gas Damper (Lower)
Block Name Detailed Name
Fig.
No.
Tg0699-PM-D2
Fig. 5A35 Table Section
8. Half-Yearly Maintenance
0207-001 Chapter 3 1-28
X-Axis Ball Screw
(1) Move the table Z axis up
to the printing position.
(2) Detach the cover located
at the front side of the
table.
(3) Apply grease with a brush
or a spatula.
Lubrication
X-Axis Linear Guide
Front Side : Apply grease with a brush.
Rear Side
Note : Remove waste thread if any.
Clean the linear guide using the following procedure.
1. Press the "Table Section" tab on the "MNL OPN" submenu window in the "SPECIAL SEL."
menu.
2. Press the [Table Up (Trans - Retrt. - Correct - Prn.Pos.)] button to lift the table.
3. Starting from the front side, apply grease on the linear guides located on the left and right
at the front and rear sides of the machine.
4. Press the [Chg. Pos. Move (Start)] button on the "Cleaning Chg." tab on the "PRODUCT
CHG." submenu window in the "AUTO OPN" menu, to secure the working space.
5. Starting from the rear side, apply grease on the linear guide located at the center on the
rear side of the machine.
Cleaning
Fig. 5A36 Table Section
: Apply grease using a grease gun.