GL541操作手册.pdf - 第105页

I/O : Press to check the input and output signals. VISION : Press to make settings for the vision system. G : Press to set G data and air pressure. NEEDLE : Press to measure needle offset. This command cannot be used unl…

100%1 / 261
Press this function key to clear the ID station changeover memory. If for some reason the ID station
quits working then this key can be pressed to return it to its original status.
Note: As the status of changeover is usually stored in memory when the power supply to the machine is
cut off, refrain from pressing this key when it is not necessary.
Chapter 3 Description of Commands
Part 3
3 - 38
Version 2.0 GL-541E Operation
INITIALIZE Clearing Program Changeover Memory 515-220
FUJI
Off line
Command path:
GL_541E Prod 0000 Sche 00000
INITIALIZE
[SET] - [STATUS] - [LMS] - [CELL STAT] - [INITIALIZE]
• Explanation To page
I/O : Press to check the input and output signals.
VISION : Press to make settings for the vision system.
G : Press to set G data and air pressure.
NEEDLE : Press to measure needle offset. This command cannot be used
unless zero setting has been completed.
MEMORY : Press to display the contents of the machine’s internal memory.
RETURN : Press to return to Page 500/000.
Chapter 3 Description of Commands
521
522
523
524
525
500
Part 3
3 - 39
Version 2.0 GL-541E Operation
MANUAL Setting and Checking Inputs and Outputs 520
FUJI
Off line
Page 520
RETURNMEMORYNEEDLEGVISIONI/O
Command path:
GL_541E Prod 0000 Sche 00000
MANUAL
[SET] - [ MANUAL]
• Action of the function keys To page
REMOTE : Press this key to check the inputs and outputs assigned to
the machine.
SEQUENCER : Press this key to check the inputs and outputs assigned to
the sequence loader.
OPLINK : Press this key to check the inputs and outputs of the
internal support relay.
SERVO : Press this key to check the inputs and outputs of the servo
board.
RETURN : Press to return to page 520.
Chapter 3 Description of Commands
521-100
521-000
521-100
Part 3
3 - 40
Version 2.0 GL-541E Operation
I/O Checking the Inputs and Outputs 521-000
FUJI
Off line
Page 521
RETURNSERVOOPLINKSEQUENCERREMOTE
Command path:
GL_541E Prod 0000 Sche 00000
I/O CHECK
[SET] - [MANUAL] - [I/O]
• Action of the function keys To page