GL541操作手册.pdf - 第169页

GL-541E Operation Part 4 The Proper data items are classified according to the following symbols. % : Varies from machine to machine. Proper data must be measured. * : Cannot be changed by the user. # : Can be changed by…

100%1 / 261
Part Four
Proper Data
GL-541E Operation
Part 4
The Proper data items are classified according to the following symbols.
% : Varies from machine to machine. Proper data must be measured.
* : Cannot be changed by the user.
# : Can be changed by the user.
@ : Automatically set by the machine (or it may be changed by the user).
$ : Not currently in use.
Attr Name Value
____________________________________________________________________________
# 1 . MG4ID ID_Code =
# 2 . MG4LG Language = 0
# 3 . MG4REL Red_Light = 1024
# 4 . MG4YEL Yellow_Light = 16420
# 5 . MG4BLL Blue_Light = 768
# 6 . MG4REB Red_Flash = 8
# 7 . MG4YEB Yellow_Flash = 8210
# 8 . MG4BLB Blue_Flash = 2241
$ 9 . MG4USDA User_Define_A = 0
$ 10 . MG4S1 spare = 0
# 11 . MG4MASA Machine_Status_A = 0
# 12 . MG4MASB Machine_Status_B = 0
# 13 . MG4MAID Machine_ID = 0
# 14 . MG4PCBL PCB_Location = 0
$ 15 . MG4RCTM Recovery_Times = 0
$ 16 . MG4S2 spare = 0
$ 17 . MG4S3 spare = 0
$ 18 . MG4S4 spare = 0
$ 19 . MG4S5 spare = 0
# 20 . MG4LOSA Loader_Status_A = 0
4 - 1
Version 2.0
Chapter 1 Table of Proper Data
1. Table of Proper Data
# 21. MG4LOSB Loader_Status_B = 0
# 22 . MG4CVT Conveyor_Type = 0
# 23 . MG4WASG Wait_Signal = 0
# 24 . MG4BUI Busy_Invalid = 0
# 25 . MG4CVC Conveyor_Control = 0
# 26 . MG4CVAL Conveyor_Adj_Limit = 50
# 27 . MG4CVSO Conveyor_Stop_Offset = 30
# 28 . MG4CVAT Conveyor_adj_Timer = 60000
% 29 . MG4WMAL Width_max_Limit = 46000
% 30 . MG4WMIL Width_min_Limit = 5000
$ 31 . MG4S6 spare = 0
$ 32 . MG4S7 spare = 0
$ 33 . MG4S8 spare = 0
$ 34 . MG4S9 spare = 0
$ 35 . MG410 spare = 0
$ 36 . MG411 spare = 0
$ 37 . MG4S12 spare = 0
$ 38 . MG4S13 spare = 0
$ 39 . MG4S14 spare = 0
# 40 . MG4LMS LMS_Flag = 0
# 41 . MG4CELL Cell_Status = 0
# 42 . MG4CHGOM Change_Over_Mode = 0
# 43 . MG4AUTOS Auto_Start = 0
$ 44 . MG4BKPC Backup_Plate_Check = 0
# 45 . MG4CMLS Command_Line_Status = 0
# 46 . MG4CMLP Command_Line_Port = 0
# 47 . MG4IDST ID_Station_Type = 0
# 48 . MG4BUZW Buzzer_Warning = 0
# 49 . MG4PROT Process_Timer = 10000
# 50 . MG4RDT Reader_Type = 0
# 51 . MG4CDRT Code_Reader_Timer = 10000
# 52 . MG4CDRR Code_Reader_Retry = 0
# 53 . MG4RD1P Reader1_Port_No = 0
Attr Name Value
Chapter 1 Table of Proper Data
4 - 2
Version 2.0
Part 4
GL-541E Operation