GL541操作手册.pdf - 第127页
G : Press to specify the G data correction values and the air pressure. SET : Press to specify the reference data used for correcting the glue volume. SET DATA : Press to specify data such as the color of the glue as see…
RETURN : Press to return to Page 522-430.
• START button
When the START button is pressed, the X-axis and the Y-table move so that the specified block skip
mark is under the mark camera. An image of the mark is acquired and inspected. Data describing
the block skip mark displays on the vision processing monitor. An error occurs if there is no board
on the Y-table.
Chapter 3 Description of Commands
Part 3
3 - 60
Version 2.0 GL-541E Operation
TEST IMAGE
Sequence 1
Pattern White
Level 128
Size_x 1.23[mm]
Size_y 1.23[mm]
Result White
Error: 12345678
B MARK Executing Inspection of a B Mark 522-435
FUJI
Off line
RETURN
Command path:
GL_541E Prod 0000 Sche 00000
B MARK
Ready
[SET] - [MANUAL] - [VISION] - [VISION TEST] - [B MARK]
• Action of the function keys
G : Press to specify the G data correction values and the air pressure.
SET : Press to specify the reference data used for correcting the glue
volume.
SET DATA : Press to specify data such as the color of the glue as seen by the
camera and the camera reading range.
RETURN : Press to return to Page 520.
Chapter 3 Description of Commands
523-100
523-200
523-300
520
Part 3
3 - 61
Version 2.0 GL-541E Operation
GLUE Selecting the Glue Commands 523-000
FUJI
Off line
Page 523
RETURNSET DATASETG
Command path:
GL_541E Prod 0000 Sche 00000
GLUE
[SET] - [MANUAL] - [GLUE]
• Action of the function keys To page
Use the ▲ and ▼ keys to select the desired application time or air pressure.
▲ : Press to move the cursor up one line.
▼ : Press to move the cursor down one line.
RETURN : Press to return to Page 523.
• Input from numerical keypad
Input the required values from the numerical keypad.
Input the glue application time (G data column of the application sequence) as a coefficient [%] in
the range from 1 to 999%.
Input the glue application pressure as a coefficient of the supply air pressure (5 kg/cm) in the range
from 1 to 100%.
Chapter 3 Description of Commands
Part 3
3 - 62
Version 2.0 GL-541E Operation
Compensation Values
CG. Z1 100
CG. Z2 100
CG. Z3 100
AirP Z1 50
Ref. data: 2000 [um
2
} AirP Z2 50
AirP Z3 50
G Setting Application Time and Air Pressure 523-100
FUJI
Off line
Page 523
RETURN
▼▲
Command path:
GL_541E Prod 0000 Sche 00000
GLUE
Value?
[SET] - [MANUAL] - [GLUE] - [G]
• Action of the function keys