GL541操作手册.pdf - 第81页
SEQ. NO : Input the sequence number from which operation is to start. MODE : Press to select the operation mode: The modes are: “Product” Normal production mode. “Simulate” In this mode the machine operates as for produc…
AUTO : Press to carry out automatic operation.
STEP : Press to carry out step operation.
LOADER : Press to operate the loaders.
PROGRAM : Press to set the production program.
SET : Press to make other settings.
* : This function has no action.
• Explanation
The command page is displayed after the power is turned on and machine zero setting is complete.
It is also displayed when the [F6] function key is pressed repeatedly from any page.
Chapter 3 Description of Commands
100-000
200-000
300-000
400-000
500-000
Part 3
3 - 14
Version 2.0 GL-541E Operation
Ready 000
FUJI
Off line
Page 000
*SETPROGRAMLOADERSTEPAUTO
Command path:
GL_541E Prod 0000 Sche 00000
Ready
THIS IS THE INITIAL DISPLAY AT THE MACHINE.
• Action of the function keys To page
SEQ. NO : Input the sequence number from which operation is to start.
MODE : Press to select the operation mode:
The modes are:
“Product” Normal production mode.
“Simulate” In this mode the machine operates as for product mode
with the exception that the Z-axis does not descend and
the glue valve does not operate.
“Idle” In this mode the machine runs continuously without
loading or unloading boards. The glue valve does not
operate.
RETURN : Press to return to page 000/000.
Chapter 3 Description of Commands
000-000
Part 3
3 - 15
Version 2.0 GL-541E Operation
Press START
AUTO Automatic Operation 100
FUJI
Off line
Page 100
RETURNMODESEQ. NO
Command path:
GL_541E Prod 0000 Sche 00000
AUTO
AUTO
[AUTO]
• Action of the function keys To page
CLEAR OFF : Presently not supported.
CHANGEOVER: This command is only valid for HELPS-machines in the manual
terminate mode or the passive cell status mode. This command
does not display when it is being executed. For details refer to the
HELPS Operation Manual.
S STOP : Press this function key to end production after completing the board
currently in the machine. The message “S Stop” displays in the
second status area when this is pressed. When production of the
current board is complete, the display returns to page 000.
CANCEL : This displays once “S STOP” is selected. Press this function key to
cancel the S STOP command.
Chapter 3 Description of Commands
172-000
Part 3
3 - 16
Version 2.0 GL-541E Operation
During automatic operation
FUJI
Off line
Page 170
S STOPCHANGEOVERCLEAR OFF
Command path:
GL_541E Prod 0000 Sche 00000
AUTO
[AUTO]
• Action of the function keys