GL541操作手册.pdf - 第202页

Chapter 1 Buf fer Image Display Part 5 1.2 Buffer Image Display The buffer image display is a display of the fiducial mark image which is held in the buffer of the vision processing board. When a vision processing error …

Part 5

5 - 1

Version 2.0

Chapter 1 Buffer Image Display

1. Buffer Image Display

Use the vision processing command sequence [SET] -> [MANUAL] -> [VISION] -> [BUFFER

IMG] to access functions which can be used to manipulate the buffer image stored in the

vision processing memory.

The ID code must be input in order to enter the [BUFFER IMG] command.

The function keys (F1~F6) shown below display when the [BUFFER IMG] command is selected.

Note: Refer to chapter 2 for details of the trace command section.

If the [RETURN] key is pressed the screen will return to the previous page.

For additional details refer to the SMD3 Operation Manual.

1.1 Buffer Image Selection

The buffer image that is to be displayed is selected using the [SEL BUF IMG] command

section.

Note: The vision processing board in this machine can hold one image in its buffer.

TRACE REINSPECT DISPLAY RETURN

F1 F2 F4 F5 F6

SEL BUF IMG

GL-541E Operation

Chapter 1 Buffer Image Display

Part 5

1.2 Buffer Image Display

The buffer image display is a display of the fiducial mark image which is held in the

buffer of the vision processing board. When a vision processing error occurs during

production, this function can be used to check the image in order to help find the cause

of the error.

The [DISPLAY] command is used to display the selected buffer image on the vision

processing monitor.

The function keys (F1~F6) shown below display when the [DISPLAY] command is

selected.

ZOOM IN: Enlarges the displayed image.

ZOOM OUT: Reduces an image that has been enlarged.

The image acquired by the mark camera cannot be reduced to a size

smaller than the size of the image when it was acquired.

SCROLL: The image can be scrolled up and down or left and right using the

scroll commands.

<<<<< Moves the image to the left.

>>>>> Moves the image to the right.

▲ Moves the image up.

▼ Moves the image down.

STEP Specifies the number of pixels the image moves each

time one of the scroll commands is pressed.

10 -> 25 -> 50 -> 100 ->10 [Pixel]

RETURN: Returns to the previous page.

ZOOM IN ZOOM OUT SCROLL RETURN

F1 F2 F4 F5 F6

5 - 2

Version 2.0

GL-541E Operation

Part 5

5 - 3

Version 2.0

Chapter 1 Buffer Image Display

1.3 Reinspection Processing

Reinspection processing uses the buffer image held in the vision processing board for

carrying out vision processing.

This function is utilized to make it easier to find the cause of an error by reinspecting the

image of the fiducial mark that led to the occurrence of a vision processing error during

production.

Since the necessary information for vision processing is saved in the buffer image, the

operator can utilize this by merely selecting the buffer image.

The selected buffer image is reinspected by using the [REINSPECT] command.

The results of reinspection processing display as vision processing results at the bottom

of the first display area).

Fiducial Mark

Vision processing results

X ****** [1/1000 mm]

Y ****** [1/1000 mm]

Glue Check (single needle)

Vision processing results

AREA_1 ****** [um*um]

SQ1_X ****** [um]

SQ1_Y ****** [um]

Glue Check (single needle)

Vision processing results

AREA_1 ****** [um*um] AREA_2 ****** [um*um]

SQ1_X ****** [um] SQ2_X ****** [um]

SQ1_Y ****** [um] SQ2_Y ****** [um]

(First display area)

GL-541E Operation