GL541操作手册.pdf - 第189页

4 - 21 V ersion 2.0 Chapter 2 Explanation of Proper Data 118. MG4LOP Loading_position (-300000 to 300000) [pulse] = 0 Coordinates of the board loading position. Standard setting: 0 120. MG4Z0Z1 Z0_Z1 (-300000 to 30000) […

100%1 / 261
Chapter 2 Explanation of Proper Data
110. MG4APRZ1 Air Pressure_Z1 (1 to 75) [%] = 50
Specify the Z1 syringe glue air pressure.
Standard setting: 050
111. MG4APRZ2 Air Pressure_Z2 (1 to 75) [%] = 50
Specify the Z2 syringe glue air pressure.
Standard setting: 050
112. MG4APRZ3 Air Pressure_Z3 (1 to 75) [%] = 50
Specify the Z3 syringe glue air pressure.
Standard setting: 050
Note: The machine refers to the settings Air_pressure_Z1, Z2 and Z3 only when the
Proper data is transmitted to the machine following a reset-start. At other times, the
values input at the machine using the numeric keypad take priority.
113. MG4GCOZ1 G_correction_Z2 (1 to 999) [%] = 100
Specify the feedback coefficient for the Z1 nozzle during glue feedback control
Standard setting: 100
114. MG4GCOZ2 G_correction_Z2 (1 to 999) [%] = 100
Specify the feedback coefficient for the Z2 nozzle during glue feedback control.
Standard setting: 100
115. MG4GCOZ3 G_correction_Z3 (1 to 999) [%] = 100
Specify the feedback coefficient for the Z3 nozzle during glue feedback control.
Standard setting: 100
116. MG4XO XO (–300000 to 300000) [pulse] = 0
Specify the X coordinate of the camera when the center of the camera is aligned with
the reference pin.
Standard setting: 0
117. MG4YO YO (–300000 to 300000) [pulse] = 0
Specify the Y coordinate of the camera when the center of the camera is aligned with
the reference pin.
Standard setting: 0
4 - 20
Version 2.0
GL-541E Operation
Part 4
4 - 21
Version 2.0
Chapter 2 Explanation of Proper Data
118. MG4LOP Loading_position (-300000 to 300000) [pulse] = 0
Coordinates of the board loading position.
Standard setting: 0
120. MG4Z0Z1 Z0_Z1 (-300000 to 30000) [pulse] = 0
Specify the Z-coordinate when the Z1 nozzle touches the surface of the board.
Standard setting: 0
121. MG4Z0Z2 Z0_Z2 (-300000 to 30000) [pulse] = 0
Specify the Z_coordinate when the Z2 nozzle touches the surface of the board.
Standard setting: 0
122. MG4Z0Z3 Z0_Z3 (-300000 to 30000) [pulse] = 0
Specify the Z-coordinate when the Z3 nozzle touches the surface of the board.
Standard setting: 0
123. MG4XCZ1 XC_Z1 (–300000 to 300000) [pulse] = 0
Specify the X-coordinate of the camera with respect to the center of the Z1 nozzle.
Standard setting: 0
124. MG4XCZ2 XC_Z2 (–300000 to 300000) [pulse] = 0
Specify the X-coordinate of the camera with respect to the center of the Z2 nozzle.
Standard setting: 0
125. MG4XCZ3 XC_Z3 (–300000 to 300000) [pulse] = 0
Specify the X-coordinate of the camera with respect to the center of the Z3 nozzle.
Standard setting: 0
126. MG4YCZ1 YC_Z1 (–300000 to 300000) [pulse] = 0
Specify the Y-coordinate of the camera with respect to the center of the Z1 nozzle.
Standard setting: 0
127. MG4YCZ2 YC_Z2 (–300000 to 300000) [pulse] = 0
Specify the Y-coordinate of the camera with respect to the center of the Z2 nozzle.
Standard setting: 0
GL-541E Operation
Part 4
Chapter 2 Explanation of Proper Data
128. MG4YCZ3 YC_Z3 (–300000 to 300000) [pulse] = 0
Specify the Y-coordinate of the camera with respect to the center of the Z3 nozzle.
Standard setting: 0
131. MG4GCMZ1 G_check_multi_Z1 (1 to 200) [%] = 0
Specify the feedback coefficient for the Z1 nozzle during glue feedback control.
Standard setting: 100
132. MG4GCMZ2 G_check_multi_Z2 (1 to 200) [%] = 0
Specify the feedback coefficient for the Z2 nozzle during glue feedback control.
Standard setting: 100
133. MG4GCMZ3 G_check_multi_Z3 (1 to 200) [%] = 0
Specify the feedback coefficient for the Z3 nozzle during glue feedback control.
Standard setting: 100
134. MG4GLCL3 G_check_limit (1 to 200) [%] = 0
Specify the range over which the glue feedback control is carried out.
Feedback is carried out if the dot diameter lies within the limit set by the equation;
reference data diameter x (1 ±Glue check limit / 100).
Standard setting: 30
135. MG4DEZ1 Delta_Z1 (–32768 to 32767) [pulse] = 0
Specify the offset value from the zero setting point for the Z1 nozzle’s Q axis.
Standard setting: 0
136. MG4DEZ2 Delta_Z2 (–32768 to 32767) [pulse] = 0
Specify the offset value from the zero setting point for the Z2 nozzle’s Q axis.
Standard setting: 0
137. MG4DEZ3 Delta_Z3 (–32768 to 32767) [pulse] = 0
Specify the offset value from the zero setting point for the Z3 nozzle’s Q axis.
Standard setting: 0
4 - 22
Version 2.0
GL-541E Operation
Part 4