GL541操作手册.pdf - 第150页
FUNCTION 9~12 : Presently not supported. ETC. MODE : Press to return to Page DBG. RETURN : Press to return to Page 520/000. Chapter 3 Description of Commands DBG 520 Part 3 3 - 84 V ersion 2.0 GL-541E Operation MEMOR Y D…
OUT PUT UNIT : Press to change the output unit.
M/C OPTION :
FUNCTION 7~8 : Presently not supported.
ECT. MODE : Press to go to Page DBG-5-5.
RETURN : Press to return to Page 520/000.
Note: This command is only used for debugging.
Chapter 3 Description of Commands
DBG-5-5
520
Part 3
3 - 83
Version 2.0 GL-541E Operation
MEMORY Displaying the Memory Contents DBG-5
FUJI
Off line
Page DBG-5
RETURNECT MODEFUNCTION 8FUNCTION 7M/C OPTIONOUT PUT UNIT
Command path:
GL_541E Prod 0000 Sche 00000
MEMORY
[SET] - [MANUAL] - [MEMORY] - [ETC. MODE]
• Action of the function keys To page
FUNCTION 9~12 : Presently not supported.
ETC. MODE : Press to return to Page DBG.
RETURN : Press to return to Page 520/000.
Chapter 3 Description of Commands
DBG
520
Part 3
3 - 84
Version 2.0 GL-541E Operation
MEMORY Displaying the Memory Contents DBG-5-5
FUJI
Off line
Page DBG-5-5
RETURNECT. MODEFUNCTION 12FUNCTION 11FUNCTION 10FUNCTION 9
Command path:
GL_541E Prod 0000 Sche 00000
MEMORY
[SET] - [MANUAL] - [MEMORY] - [ETC. MODE] - [ECT. MODE]
• Action of the function keys To page
MARK CAMERA : Press to measure the mark camera Proper data.
X0/Y0 : Press to measure the X and Y-coordinates of the reference
pin.
XC/YC : Press to measure the X and Y-coordinates of the nozzle
center.
Z0 : Press to measure the Z-axis coordinate when the nozzle is
making contact with the surface of the board.
LOAD PSTN : Press to measure the coordinates of the Y-axis when the
loader is connected.
RETURN : Press to return to Page 500.
• Input from numerical keypad
Using the numerical keypad input the ID code set in Proper data.
Chapter 3 Description of Commands
531
532
533
534
535
500
Part 3
3 - 85
Version 2.0 GL-541E Operation
Proper
X0 : 15710 Y0 : 621
Xc_1 : 7038 Yc_1 : -1708
Xc_2 : 13540 Yc_2 : -1706
Xc_3 : 8040 Yc_3 : -1710
Z0_1 : 283
Z0_2 : 254
Z0_3 : 265
Xc_1 : 8735
PROPER Measuring Proper Data 530
FUJI
Off line
Page 530
RETURNLOAD PSTNZ0XC/YCX0Y0MARK CAMERA
Command path:
GL_541E Prod 0000 Sche 00000
PROPER
id code?
[SET] - [PROPER]
• Action of the function keys To page