GL541操作手册.pdf - 第168页

Part Four Proper Data

100%1 / 261
RETURN : Press to return to Page 540.
• Explanation
The conveyor width can be inched using the [↑] [↓] keys. The conveyor width can be set using the
numerical keypad. Use the numerical keys to enter the conveyor width in units of 1/100 mm. This
value must lie within the range of board widths that the machine can handle. A value outside this
range cannot be input.
Chapter 3 Description of Commands
540
Part 3
3 - 101
Version 2.0 GL-541E Operation
CONV. WIDTH Changing and Setting Conveyor Width 542
FUJI
Off line
Page 542
RETURN
Command path:
GL_541E Prod 0000 Sche 00000
CONV. WIDTH
[SET] - [SERVO] - [CONV. WIDTH]
• Action of the function keys To page
Part Four
Proper Data
GL-541E Operation
Part 4
The Proper data items are classified according to the following symbols.
% : Varies from machine to machine. Proper data must be measured.
* : Cannot be changed by the user.
# : Can be changed by the user.
@ : Automatically set by the machine (or it may be changed by the user).
$ : Not currently in use.
Attr Name Value
____________________________________________________________________________
# 1 . MG4ID ID_Code =
# 2 . MG4LG Language = 0
# 3 . MG4REL Red_Light = 1024
# 4 . MG4YEL Yellow_Light = 16420
# 5 . MG4BLL Blue_Light = 768
# 6 . MG4REB Red_Flash = 8
# 7 . MG4YEB Yellow_Flash = 8210
# 8 . MG4BLB Blue_Flash = 2241
$ 9 . MG4USDA User_Define_A = 0
$ 10 . MG4S1 spare = 0
# 11 . MG4MASA Machine_Status_A = 0
# 12 . MG4MASB Machine_Status_B = 0
# 13 . MG4MAID Machine_ID = 0
# 14 . MG4PCBL PCB_Location = 0
$ 15 . MG4RCTM Recovery_Times = 0
$ 16 . MG4S2 spare = 0
$ 17 . MG4S3 spare = 0
$ 18 . MG4S4 spare = 0
$ 19 . MG4S5 spare = 0
# 20 . MG4LOSA Loader_Status_A = 0
4 - 1
Version 2.0
Chapter 1 Table of Proper Data
1. Table of Proper Data