GL541操作手册.pdf - 第3页

Contents Contents Introduction ..........................................................................................vii About this Manual .............................................................................…

Notice

1. All rights regarding this manual are reserved by Fuji Machine Manufacturing Co., Ltd. This

manual may not, in whole or in part, be reproduced by any means (electronic, mechanical or

otherwise), or reused in any way, without the prior written permission of Fuji Machine

Manufacturing Co., Ltd.

2. Fuji Machine Manufacturing Co., Ltd. accepts no responsibility for any situations that may arise as

a result of the use of this manual.

3. Fuji Machine Manufacturing Co., Ltd. reserves the right to change the content of this manual

without notice.

4. Every effort has been made to ensure that this manual is correct in every detail. However, please

contact Fuji in the unlikely event that errors or omissions are detected.

Fuji Machine Manufacturing Co., Ltd. serves its customers from the following locations:

Fuji Machine Manufacturing Co., Ltd.

19 Chausuyama Yamamachi

Chiryu, Aichi Prefecture, 472-8686 Tel : 0566-81-2111

Japan Fax : 0566-83-1140

Fuji America Corporation

171 Corporate Woods Parkway

Vernon Hills, IL. 60061 Tel : 847-913-0162

USA Fax : 847-913-0186

Fuji Machine Mfg (Europe) GmbH

Peter-Sander-Str. 43

D-55252 Mainz-Kastel Tel : 06134-202120

Germany Fax : 06134-202200

Fuji Singapore Office

C/O Mecomb Singapore Limited

Sime Darby Centre

896 Dunearn Road #04-03A, Tel : 4675952

Singapore 589472 Fax : 4693758

Fuji Malaysia Office

C/O Mecomb Malaysia Sdn Bhd

2487, Jalan Sultan Azlan Shah Tel : 604-656-4002

11700 Penang, Malaysia Fax : 604-656-2941

Fuji Do Brasil Maquinas Industrials Ltda.

Edificio Eluma Avenida Paulista 1294-5

Andar Sao Paulo, S. P. CEPO 1310-100 Tel : 11-284-6511

Brazil Fax : 11-289-1097

Contents

Introduction ..........................................................................................vii

About this Manual.................................................................................ix

Part One, GL-541E Machine Operation

1. Outline of the Machine .................................................................1–1

1.1 Connecting the Power Supply ..........................................................................................1–1

1.2 Connecting to F4G............................................................................................................1–1

1.3 Control System .................................................................................................................1–2

1.3.1 VME Boards........................................................................................................1–2

1.3.2 CPU Module (Board Loader PLC) ......................................................................1–3

1.3.3 Direct I/O Controller ............................................................................................1–3

2. Before Operating the Machine.....................................................1–5

2.1 Turning On the Power Supply...........................................................................................1–5

2.2 Preparing for Operation ....................................................................................................1–6

2.2.1 Operations after the Reset-Start.........................................................................1–6

2.2.2 Zeroing the Machine ...........................................................................................1–7

2.2.3 Setting the Production Program and Production Quantity ..................................1–8

2.2.4 Setting the Operation Mode................................................................................1–9

2.3 Ending Operation...........................................................................................................1–10

3. Operation Panel...........................................................................1–11

3.1 Operation of the Keys.....................................................................................................1–11

3.1.1 Turning the Power On and Off..........................................................................1–11

3.1.2 Starting Operation.............................................................................................1–11

3.1.3 Interrupting Auto Operation...............................................................................1–12

3.1.4 Cancelling the Board Wait Status .....................................................................1–12

3.1.5 Clearing Alarms ................................................................................................1–12

3.1.6 Carrying out the Reset-Start Operation ............................................................1–12

3.1.7 Stopping the Machine Instantaneously.............................................................1–12

3.1.8 Selecting and Executing Commands................................................................1–13

3.1.9 Moving Axes Manually (Inching).......................................................................1–13

3.1.10 Displaying G Data Feedback Coefficients ........................................................1–15

iVersion 2.0

Contents

3.1.11 Turning the Glue Valve On ...............................................................................1–15

3.1.12 Turning on the CCD Camera Lamps ................................................................1–16

3.1.13 Inputting Data....................................................................................................1–16

3.2 CRT display ....................................................................................................................1–17

3.2.1 Details of the First Display Area........................................................................1–19

3.2.2 Details of the Second Display Area (Machine Error Display)............................1–20

Version 2.0