00196457-05_UM_SX12DX12_SR706_EN.pdf - 第102页

3 Technical data and assemblies Us er Manual SIPLACE SX1/SX2/DX1/DX2 3.2 Performance data for SIPLACE DX1/DX2 From software version SC.706.xx Version 0 6/2012 EN 102 3.2.2 Placement dat a 3 Component range- a 0.4 mm x 0.…

100%1 / 380
User Manual SIPLACE SX1/SX2/DX1/DX2 3 Technical data and assemblies
From software version SC.706.xx Version 06/2012 EN 3.2 Performance data for SIPLACE DX1/DX2
101
3.2 Performance data for SIPLACE DX1/DX2
3.2.1 Machine performance
3
Placement head types SIPLACE SpeedStar (C&P20)
SIPLACE 12 segment Collect&Place (C&P12)
SIPLACE TwinStar (TH)
Placement performance
The placement performance is influenced by the different head combinations and head positions, plus the con-
veyor configurations. Individual options and customized applications also influence the placement performance.
On request, SIPLACE can calculate the actual performance of your product on your machine configuration.
IPC value [components/h]
According to the vendor-neutral conditions of the IPC 9850 standard published by the Association of Connect-
ing Electronics Industries.
SIPLACE benchmark value [components/h]
The SIPLACE benchmark value is measured during the machine acceptance tests. It corresponds to the condi-
tions set out in the SIPLACE scope of service and supply.
Theoretical maximum output value [components/h]
The theoretical maximum output value is calculated from the most favorable conditions for each machine type
and setting, and corresponds to the theoretical conditions normally used in the industry.
Placement machine
SIPLACE DX2
Placement area IPC value Benchmark value Theoretical value
C&P20 / C&P20 48,000 60,000 67,750
C&P20/C&P12 31,000 43,000 53,000
C&P12/C&P12 25,500 31,000 41,000
TH/C&P12 16,500 18,500 25,000
Placement machine
SIPLACE DX1
Placement area IPC value Benchmark value Theoretical value
C&P20 24,000 30,000 33,875
C&P12 14,000 16,000 21,000
TH 5,100 5,500 6,500
3 Technical data and assemblies User Manual SIPLACE SX1/SX2/DX1/DX2
3.2 Performance data for SIPLACE DX1/DX2 From software version SC.706.xx Version 06/2012 EN
102
3.2.2 Placement data
3
Component range-
a
0.4 mm x 0.2 mm to max. 200 mm x 110 mm
Component height C&P20
C&P12
TH
4 mm
6 mm
25 mm (greater height on request)
X/Y accuracy
b
C&P20 ± 41 μm (3), ± 55 μm (4) Component camera, type 23 (6 x 6)
C&P12 ± 45 μm (3), ± 60 μm (4) Component camera, type 28 (18 x 18)
C&P12 ± 41 μm (3), ± 55 μm (4) Component camera, type 30 (18 x 18)
TH ± 36 μm (3), ± 50 μm (4) Component camera, type 36 (32 x 32)
TH ± 26 μm (3), ± 35 μm (4) Component camera, type 33 (55 x 45)
TH ± 22 μm (3), ± 30 μm (4) Component camera, type 25 (16 x 16)
Angular accuracy C&P20 ± 0.5° (3), ± 0.7° (4) Component camera, type 23 (6 x 6)
C&P12 ± 0.5° (3), ± 0.7° (4) Component camera, type 28 (18 x 18)
C&P12 ± 0.5° (3), ± 0.7° (4) Component camera, type 30 (18 x 18)
TH ± 0.05° (3), ± 0.07° (4) Component camera, type 36 (32 x 32)
TH ± 0.05° (3), ± 0.07° (4) Component camera, type 33 (55 x 45)
TH ± 0.05° (3), ± 0.07° (4) Component camera, type 25 (16 x 16)
a) Please note that the component range that can be placed is also affected by the pad geometry, the customer-specific stan-
dards, the component packaging tolerances and the component tolerances.
b) The accuracy value, measured using the vendor-neutral IPC standard.
User Manual SIPLACE SX1/SX2/DX1/DX2 3 Technical data and assemblies
From software version SC.706.xx Version 06/2012 EN 3.2 Performance data for SIPLACE DX1/DX2
103
3.2.3 Board conveyor data
3
Single conveyor Flexible dual conveyor Dual conveyor in single con-
veyor mode
Standard dimensions
(length x width)
50 mm x 50 mm to
450 mm x 560 mm
a
50 mm x 50 mm to
450 mm x 262 mm
50 mm x 50 mm to
450 mm x 460 mm
Dimensions with “Long Board
b
”option
(length x width) 50 mm x 50 mm to
610 mm x 560 mm
b
50 mm x 50 mm to
610 mm x 262 mm
50 mm x 50 mm to
610 mm x 460 mm
Stationary conveyor side Right, left or outer
Automatic electrical width adjustment- Yes
PCB thickness
Standard:
"Thick board" option
0.3 mm to 4.5 mm
4.5 mm to 6.5 mm
PCB warpage See page 151
PCB weight
c
standard
“Heavy Board” option
max. 2.0 kg
max. 5.0 kg
max. 1.0 kg
max. 2.0 kg
max. 2.0 kg
max. 5.0 kg
Clearance on PCB underside
d
30 mm
PCB conveyor height
Option:
Standard:
SMEMA option:
900 mm
930 mm
950 mm
Type of interface:
Standard:
Option:
SMEMA
Siemens
Component-free PCB handling edge 3.0 mm
PCB changeover time
Single conveyor
Dual conveyor
e
< 1.5 seconds
0 seconds
a) When using board widths > 450 mm, make sure that the peripheral modules can also process these board widths.
b) Longer boards available on request
c) The board weight value refers to the weight of the board plus the weight of the components.
d) The free positioning of board supports is limited by the stop bar.
e) 0 seconds in asynchronous mode, otherwise 1.5 seconds.
Important information for machines in combination with DX2 and DX1:
When setting up a machine (S; F, HS, HF, X, SX or D series) next to a SIPLACE DX2 or SIPLACE
DX1, take note of the limited space between the two machines. In these cases, you will need a 0.5
m conveyor between the SIPLACE DX2/SIPLACE DX1 and the adjacent machines.