00196457-05_UM_SX12DX12_SR706_EN.pdf - 第34页
1 Introduction User Manual SIPLACE SX1/SX2/DX1/DX2 1.7 Important notes on the user manual From software version SC.706.xx Version 06/2012 EN 34
User Manual SIPLACE SX1/SX2/DX1/DX2 1 Introduction
From software version SC.706.xx Version 06/2012 EN 1.7 Important notes on the user manual
33
WBO Wide board option (21")
1 Introduction User Manual SIPLACE SX1/SX2/DX1/DX2
1.7 Important notes on the user manual From software version SC.706.xx Version 06/2012 EN
34
User Manual SIPLACE SX1/SX2/DX1/DX2 2 Operational safety
From software version SC.706.xx Version 06/2012 EN 2.1 Safety instructions
35
2 Operational safety
2.1 Safety instructions
2.1.1 Conventions for the use of hazard symbols
This user manual contains notes that must be observed to guarantee your personal safety and to
avoid damage to equipment. These notes are highlighted by warning triangles and are indicated
as follows according to the level of risk:
DANGER or
as used in this user manual means that death, severe injury or considerable damage to equipment
will occur if the danger instructions are not followed.
WARNING or
as used in this user manual means that death, severe injury or considerable damage to equipment
may occur if the warning instructions are not followed.
CAUTION or
as used in this user manual means that slight injury or damage to equipment may occur if the cau-
tion instructions are not followed.
PLEASE NOTE
as used in this user manual provides information on the product or indicates a part of the user
manual that requires particular attention.
2.1.2 Qualified personnel
Qualified or adequately trained personnel means that these people are familiar with the setting up,
operation and preventive maintenance of placement machines and add-on devices and are suit-
ably qualified, e.g.
– have been trained, instructed or authorized to switch on and off, isolate, earth and identify
electrical circuits and system components in accordance with normal safety standards.
– have been trained or instructed in the upkeep and use of appropriate safety equipment in ac-
cordance with normal safety standards.
– have received first aid training.