00196457-05_UM_SX12DX12_SR706_EN.pdf - 第330页
6 Station extensions User manual SIPLACE SX1/SX2/DX1/DX2 6.1 Nozzle changer From software version SC.706.xx Version 06/2012 EN 330 PLEASE NOTE 6 – Move th e locking plate int o the "Magazine locke d" position. …
User manual SIPLACE SX1/SX2/DX1/DX2 6 Station extensions
From software version SC.706.xx Version 06/2012 EN 6.1 Nozzle changer
329
WARNING 6
Any lever that is protruding over the magazine (item 1 in fig 6.1 - 4
) can result in a head crash.
You should therefore make sure that the lever does not protrude over the magazines.
6
Fig. 6.1 - 20 Nozzle changer for the SpeedStar - changing the magazine
(1) Lever for raising the magazine
(2) Parallel pin, engages in the hole in the magazine
(3) Spring pin (3 x) for triggering the microswitch
(4) Pin of the slide mechanism, moves the locking plate
(5) Ball of snap fastener
(6) Parallel pin, engages in the slot in the magazine
(7) Locking plate in the "Magazine locked" position
(1)
(2)
(3)
(4)
(5)
(3)
(6)
(3)
(7)
6 Station extensions User manual SIPLACE SX1/SX2/DX1/DX2
6.1 Nozzle changer From software version SC.706.xx Version 06/2012 EN
330
PLEASE NOTE 6
– Move the locking plate into the "Magazine locked" position.
– Before inserting, align the magazine so that the centering pins (items 2 and 6 in fig. 6.1 - 4
,
page 310) slide into the centering holes and slot.
Place the magazine on the snap fastener balls (item 5 in fig. 6.1 - 4, page 310).
Press the magazine down evenly so that the snap fastener balls engage in all the snap fas-
teners at the same time.
6.1.4.7 Position detection
Each magazine of the nozzle changer has two fiducials: one for determining the position and one
for determining the angular position.
6
Fig. 6.1 - 21 Nozzle magazine - holder numbering, fiducials for determining the position and angular position
(1) Locking plate in the "Magazine open" position
(2) Fiducial for determining the position
(3) Fiducial for determining the angular position
User manual SIPLACE SX1/SX2/DX1/DX2 6 Station extensions
From software version SC.706.xx Version 06/2012 EN 6.2 Waffle pack changer (WPC5/WPC6)
331
6.2 Waffle pack changer (WPC5/WPC6)
The functionality and the technical data for the WPC5 are largely identical to those for the WPC6.
However, the WPC6 also has a non-stop module. The WPC5/6 can be used both on the SIPLACE
SX1/SX2 and on the DX1/DX2.
6.2.1 Overview WPC 5
Item no. 00119827-xx WPC5
6
Fig. 6.2 - 1 WPC5 on the SIPLACE SX1/SX2
(1) WPC5
(2) Component trolley with 30 tracks
(1)
(2)