00196457-05_UM_SX12DX12_SR706_EN.pdf - 第188页
3 Technical data and assemblies Us er Manual SIPLACE SX1/SX2/DX1/DX2 3.11 Component trolley for SIPLACE SX1/SX2 From software version SC.706.xx Version 06/2012 EN 188 The component trolleys are st and-alon e modules that…
User Manual SIPLACE SX1/SX2/DX1/DX2 3 Technical data and assemblies
From software version SC.706.xx Version 06/2012 EN 3.11 Component trolley for SIPLACE SX1/SX2
187
3.11 Component trolley for SIPLACE SX1/SX2
Item no. 00519922-xx Component trolley for SIPLACE SX1/SX2 with 60 tracks
Item no. 00519722-xx Component trolley for SIPLACE SX1/SX2 with 30 tracks
The SIPLACE SX1/SX2 machines can accommodate two SIPLACE SX1/SX2 component trolleys,
each with 60 tracks. If a WPC5/WPC6 is set up at one of the locations, the other location can ac-
commodate a component trolley with 30 tracks.
3
Fig. 3.11 - 1 Component trolley locations, SIPLACE SX1/SX2
(1) Location 1
(2) Location 2
(T) Direction of PCB transport
CAUTION 3
The SIPLACE SX1/SX2 component trolleys may only be docked onto locations at which the
component trolley docking unit for the SIPLACE SX1/SX2 has been installed (fig. 5.15 - 4
, page
300 ).
(2)
(1)
3 Technical data and assemblies User Manual SIPLACE SX1/SX2/DX1/DX2
3.11 Component trolley for SIPLACE SX1/SX2 From software version SC.706.xx Version 06/2012 EN
188
The component trolleys are stand-alone modules that can be set up with feeders at an external
setup area. This means that the production process only has to be interrupted briefly in order to
change the component trolley.
3
Fig. 3.11 - 2 Component trolley, SIPLACE SX1/SX2
(1) Changeover table with 60 tracks
(2) Height setting for fine adjustment to the machine height
3.11.1 Structure
The component trolley essentially consists of the chassis, the changeover table for holding the
feeder modules, the tape reel container and the waste tape container. There are two different com-
ponent trolleys available. One component trolley has a changeover table with 60 tracks and the
other one has a changeover table with 30 tracks. The component trolley with 30 tracks must be
set up next to the WPC5/WPC6.
(2)
(1)
User Manual SIPLACE SX1/SX2/DX1/DX2 3 Technical data and assemblies
From software version SC.706.xx Version 06/2012 EN 3.11 Component trolley for SIPLACE SX1/SX2
189
3
Fig. 3.11 - 3 Component trolley, SIPLACE SX1/SX2 with 60 tracks, front and rear view
(1) Chassis
(2) Changeover table
(3) Tape container
(4) Waste tape container
(5) Handle
(6) Hand guard
CAUTION 3
Observe the safety instructions in section 5.8.2, page 271, when you pull the tape reject bin
out of the component trolley.
– The handles may only be used to push the component trolley.
Use a fork-lift if you want to transport the component trolley or lift it off the pallet.
(1)
(2)
(5)
(4)
(3)
(5)
(4)
(6)
(6)