00196457-05_UM_SX12DX12_SR706_EN.pdf - 第334页
6 Station extensions User manual SIPLACE SX1/SX2/DX1/DX2 6.2 Waffle pack changer (WPC5/WPC6) From software version SC.706.xx Version 06/2012 EN 334 6.2.5 T echnical data 6.2.5.1 Dimensions, weight 6 WPC5/WPC6 dimensions …
User manual SIPLACE SX1/SX2/DX1/DX2 6 Station extensions
From software version SC.706.xx Version 06/2012 EN 6.2 Waffle pack changer (WPC5/WPC6)
333
6.2.3 Safety instructions
WARNING 6
Do not reach into the gaps between the waffle pack changer and the machine base while the
machine is running.
The waffle pack changer control cable may only be connected to the connecting socket or
taken from this if the waffle pack changer is docked into the machine.
The power supply cable must not be plugged into or unplugged from the external power sup-
ply unless the waffle pack changer is docked into the machine.
The waffle pack changer may NOT be operated unless it is docked into the machine.
6.2.4 Description
The waffle pack changer makes components available in the waffle pack trays, to avoid unneces-
sary loss of time during storage and automatic changing of the waffle pack trays. The individual,
programmable access to up to 28 waffle pack trays also increases the range of components avail-
able.
The waffle pack changer has an integral chassis, and is easy to move to other locations. It is sup-
plied with the PCB conveyor height set for the customer-specific machine but can be quickly and
easily adapted to conveyor heights of 900, 930, and 950 mm. The changeover table/DX table with
30 locations needs to be set up on the remaining location.
6 Station extensions User manual SIPLACE SX1/SX2/DX1/DX2
6.2 Waffle pack changer (WPC5/WPC6) From software version SC.706.xx Version 06/2012 EN
334
6.2.5 Technical data
6.2.5.1 Dimensions, weight
6
WPC5/WPC6 dimensions
Length x width
Height
For 900 mm PCB conveyor height
For 930 mm PCB conveyor height
For 950 mm PCB conveyor height
1520 mm x 360 mm
1430 mm
1460 mm
1480 mm
WPC5 weight
Basic configuration (with cassettes and waffle pack tray carriers)
Fully configured (with WPTC and cassette with components)
approx. 270 kg
approx. 320 kg
WPC6 weight
Basic configuration (with cassettes and waffle pack tray carriers)
Fully configured (with WPTC and cassette with components)
approx. 280 kg
approx. 330 kg
WPC5/WPC6 surface load 25 N/cm²
Weight of the waffle pack tray carrier 0.8 kg
Dimensions of the waffle pack tray carrier
(length x width x height) 360 mm x 260 mm x 6 mm
Dimensions of the waffle pack tray
length x width x height 347 mm x 235 mm x 15 mm
Height of waffle-pack tray, including component
WPC5
a
/WPC6
Mode - standard:
Mode - high components:
to max. 29 mm
to max. 32 mm
Distance from level to level 17 mm (± 2 mm)
Storage capacity 28 waffle pack tray carriers
Changeover time for waffle-pack tray carriers
over 1 level
over 10 levels
over 27 levels
1.9 s
2.3 s
2.8 s
a) In WPC5 from serial number 1484, component height of up to 35 mm (maximum) possible.
User manual SIPLACE SX1/SX2/DX1/DX2 6 Station extensions
From software version SC.706.xx Version 06/2012 EN 6.2 Waffle pack changer (WPC5/WPC6)
335
6.2.5.2 Electrical ratings
6
6.2.5.3 Permitted environmental factors
6
6.2.6 Installation notes for WPC5/WPC6
The WPC5/WPC6 can be docked onto the left side (at location 1 or location 2) of the SX/DX ma-
chine.
Supply voltage 3 x 200 V~ ± 5 %; 50/60 Hz (Japan)
3 x 208 V~ ± 5 %; 50/60 Hz (U.S.A)
3 x 230 V~ ± 5 %; 50/60 Hz
3 x 380 V~ ± 5 %; 50/60 Hz
3 x 400 V~ ± 5 %; 50/60 Hz (Europe)
3 x 415 V~ ± 5 %; 50/60 Hz
Nominal apparent power 1.5 kVA
Nominal active power 1.0 kW
Fuse 3 x 10 or 3 x 16 A
Room temperature Between 15°C and 35°C
Atmospheric humidity 30 - 75%
(on average not higher than 45%, so that there is no risk of
condensation on the machine.)