00196457-05_UM_SX12DX12_SR706_EN.pdf - 第343页
User manual SIPLACE SX1/SX2/DX1/DX2 6 Station exte nsions From software version SC.706.xx V ersion 06/2012 EN 6.4 PCB barcod e scanner 343 6.4 PCB barcode scanner Item no. 001761 17-xx 2D board code reader Item no. 00519…
6 Station extensions User manual SIPLACE SX1/SX2/DX1/DX2
6.3 DX changeover tables on the SIPLACE DX1/DX2 From software version SC.706.xx Version 06/2012 EN
342
6.3.4 Adjusting the DX changeover table to the PCB conveyor height
The optional DX changeover table is handled in the same way as the component trolley.
See “Adjusting the component trolley to the PCB conveyor height” on page 236.
6.3.5 Setting up the feeder modules
The optional DX changeover table is handled in the same way as the component trolley.
See “Setting up the feeder modules” on page 277.
User manual SIPLACE SX1/SX2/DX1/DX2 6 Station extensions
From software version SC.706.xx Version 06/2012 EN 6.4 PCB barcode scanner
343
6.4 PCB barcode scanner
Item no. 00176117-xx 2D board code reader
Item no. 00519889-xx Electrics assembly kit for 2D board code reader
Item no. 00519880-xx 1D board barcode reader
Item no. 00519890-xx Electrics assembly kit for 1D board barcode reader
Item no. 00519884-xx Mechanics assembly kit for single conveyor
Item no. 00519885-xx Mechanics assembly kit for dual conveyor
6.4.1 Description
The PCB barcode reader is used to automatically record and decode barcodes on PCBs. The
PCB barcode scanners are installed on a special frame on the input side of the placement ma-
chine on the PCB
conveyor. Depending
on the position of the barcode strips, the barcode scanner can be attached in a few simple
steps so that the strips can be read parallel to or across the PCB transport direction.
When using single conveyors, two board barcode readers can be retrofitted. These can either
scan the top or bottom of the boards.
When using dual conveyors, four board barcode readers can be retrofitted. These can scan both
the top or bottom of the boards on both conveyor lanes.
There are two variants of the barcode scanner:
– 1D board barcode readers
This barcode scanner processes barcodes. 6
– 2D board code reader
This code reader processes barcodes and matrix codes. Matrix code is primarily used when
there is
not enough space for barcode labels. 6
PLEASE NOTE:
A combination of 1D and 2D barcode reader and the 2D code reader in the same machine is not
possible. 6
6 Station extensions User manual SIPLACE SX1/SX2/DX1/DX2
6.4 PCB barcode scanner From software version SC.706.xx Version 06/2012 EN
344
6.4.2 Technical data - 1D barcode scanner
6
6.4.3 Technical data - 2D code reader
6
6
Dimensions (L x W x H)
40 x 30 x 20 mm
3
Weight 44 grams
Wave length 600 to 680 nm
Laser class Class 2, in line with DIN EN 60825-1, class II - CDRH
Scanning frequency 800 to 1200 scans/seconds
Code types Code 39, Code 128, Code 93,
Codabar, EAN, EAN 128, UPC,
2/5 Interleaved, Pharma Code, ISTB 128
Barcode length
Single conveyor
Dual conveyor, asynchronous
Dual conveyor, synchronous
Max. 40 characters
Max. 40 characters
Max. 40 characters
Data interface RS232, RS485
Electrical connection 15-pin D-Sub HD connector
Operating voltage 5 V- ± 5 %
Dimensions (L x W x H)
55 x 42 x 22 mm
3
Weight 125 grams
Code types 2D Data Matrix ECC 0, 50, 80, 100, 140 and 200
Data Matrix ECC200
QR Code, MicroQR Code
Barcode length
Single conveyor
Dual conveyor, asynchronous
Dual conveyor, synchronous
Max. 40 characters
Max. 40 characters
Max. 40 characters
Data interface RS232, USB 2.0
Electrical connection 15-pin D-Sub HD connector
Operating voltage 5 V- to 24 V-