00196457-05_UM_SX12DX12_SR706_EN.pdf - 第338页
6 Station extensions User manual SIPLACE SX1/SX2/DX1/DX2 6.2 Waffle pack changer (WPC5/WPC6) From software version SC.706.xx Version 06/2012 EN 338 6.2.8.1 Safety equipment EMERGENCY STOP button 6 After pressing the EMER…
User manual SIPLACE SX1/SX2/DX1/DX2 6 Station extensions
From software version SC.706.xx Version 06/2012 EN 6.2 Waffle pack changer (WPC5/WPC6)
337
6.2.8 Controls
6
Fig. 6.2 - 4 WPC - controls
(1) EMERGENCY STOP button
(2) Main power switch
(3) Crank for raising or lowering the chassis
(4) Safety door
(5) Waffle pack tray storage unit
(6) Non-stop module (WPC6 only)
(3)
(2)
(1)
(4)
(5)
(6)
6 Station extensions User manual SIPLACE SX1/SX2/DX1/DX2
6.2 Waffle pack changer (WPC5/WPC6) From software version SC.706.xx Version 06/2012 EN
338
6.2.8.1 Safety equipment
EMERGENCY STOP button 6
After pressing the EMERGENCY STOP button, the entire system, with SIPLACE SX and Waffle
Pack Changer, is immediately stopped. After releasing the EMERGENCY STOP button, the entire
system can be restarted again by pressing the start button on the SX machine. Placement can
then be continued or terminated.
PLEASE NOTE
Watch out for any incompletely placed PCBs.
Safety door 6
When you open the protective door, the lifting axis and the feed axis of the Waffle Pack Changer
are stopped. When the door is closed again, the Waffle Pack Changer continues its operation.
CAUTION 6
Do not open the Waffle Pack Changer protective door while a component is being picked up by
the Waffle Pack Changer. 6
Non-stop module (WPC6 only) 6
Waffle pack trays can be refilled or extracted during operations via the flap in the non-stop module,
without stopping the SIPLACE SX. The operating control indicates whether a waffle pack tray is
in the non-stop module, whether the non-stop module is empty or whether a waffle pack tray is
currently being moved.
CAUTION 6
If the operating control flashes. the waffle pack tray is being moved inside the non-stop module
and the activity has not yet been completed. Opening the flap triggers the emergency STOP.
6.2.9 Operation, maintenance, service
For detailed documentation of the operation, maintenance and servicing of the waffle pack
changer, refer to the manuals supplied with your waffle pack changer.
User manual SIPLACE SX1/SX2/DX1/DX2 6 Station extensions
From software version SC.706.xx Version 06/2012 EN 6.3 DX changeover tables on the SIPLACE DX1/DX2
339
6.3 DX changeover tables on the SIPLACE DX1/DX2
Item no. 03089820-xx DX changeover table SIPLACE DX1/DX2 with 60/2 tracks
Item no. 03089804-xx DX changeover table SIPLACE DX1/DX2 with 30/2 tracks
Item no. 03089843-xx DX changeover table docking unit for 60/2 tracks
Item no. 03089844-xx DX changeover table docking unit for 30/2 tracks
Just like the fixed DX tables, the DX changeover tables are optimized for the use of 2x8 mm SI-
PLACE tape feeder modules when using 8 mm tapes. By using 30 of these feeder modules, you
can achieve a full setup capacity of 60 8mm tracks.
The design and function of the DX changeover tables is basically identical to that of the compo-
nent changeover tables for the SIPLACE SX1/SX2 machines. See “Changeover table for SI-
PLACE SX1/SX2” on page 193.
6
Fig. 6.3 - 1 Locations for DX changeover tables, SIPLACE DX1/DX2
(1) Location 1
(2) Location 2
(T) Direction of PCB transport
(2)
(1)