CP45-英文版培训教材.pdf - 第105页
Operating Manual Reference Figure CP-45/55 Operation Process X Y1 Y2 WP L F SOP/ SOJ SOP2/ SOJ2 Y2 X2 P W F L X1 Y1 QFP PLCC Y2 X2 W F L P Y1 X1 Y X2 X1 P W F L 1. IC Algorithm (Auto Teaching Method) 1) Enter part thickn…
* Type and Name of IC Part
* Auto Teach
* Stick Feeder Setup
* Tray Feeder Setup
PART Register 2
CP-45/55 Operation Process
Operating Manual Reference Figure
CP-45/55 Operation Process
X
Y1 Y2
WP
L
F
SOP/
SOJ
SOP2/
SOJ2
Y2
X2
P
W
F
L
X1
Y1
QFP
PLCC
Y2
X2
W
F
L
P
Y1
X1
Y
X2
X1
P
W
F
L
1. IC Algorithm
(Auto Teaching Method)
1) Enter part thickness correctly.
2) Check for the Lead Pitch.
If Pitch exceeds
0.03 or more,
Error can be occurred frequently.
3) Auto Teach Requirement
^ Enter the part thickness
correctly.
^ Brighten the illumination
slightly.
4) Apply the Auto Teaching by use
of Fix Camera.
5) Repeat the test more than 10
times for the results.
6) When using Fly Camera for
operation, test it after changing
the illumination on Fly Camera.
(Note) For SOP/SOJ, select and register
that suitable for part feed direction.
Operating Manual Reference Figure
CP-45/55 Operation Process
Y
X
P1 D
P2
* Ball < Ball Test >
Test the Ball by moving the
size as much as distance with
method identical to the Fiducial
Mark acknowledge.
Find out the entire center by
searching the center of all of
the Balls.
* Appear Ball Size
Allowable range of Ball Size
0.1~0.5 of Size inputted
(
10% ~ 50%)
* Follow the following sequence
when inputting the data of
Connector/User IC / ODD Type.
Lead Type is similar to the Chip
Part Power TR, but its test
method depends on the IC
part.
2. BGA Algorithm
3. Connector / User IC
/ ODD